efficient piston press briquetting machine in Nigeria

The efficient piston press briquetting machine is used in charcoal production lines. In general, the whole production line consists of a crusher machine, a drying machine, a briquette machine, a carbonation furnace and some auxiliary equipment. The finished charcoal products are of high density and good flammability.

There are various materials that can be used to make biomass briquettes through piston press briquetting machinein Nigeria. For instance, you can make use of crop stalks, wood surplus material of forestry, organic wastes of food processing industry to produce biomass briquettes that can be used as fuel.

efficient piston press briquetting machine in Nigeria employ the working principle of extruding materials under high pressure and high temperature. The components of EP biomass briquetting equipment are made of high-quality material.

efficient piston press briquetting machine in Nigeria can be used to press many different kinds of crushed biomass materials. And you can use them in continuous production lines. Besides, it consumes less energy, and it can work efficiently.

efficient piston press briquetting machine in Nigeria adopt v-belt drive which can make the machine work smoothly. In addition, v-belt drive can also act as overload protection device. Moreover, there are two connection modes of the machine head and the cylinder body: insert connection and bolted connection. And you can choose the best connection mode according actual situation.

A charcoal briquette production line basically consists of a crushing machine, a dryer, a efficientpiston press briquetting machine and a carbonation furnace. These machines are placed in order to make high-quality charcoal briquettes. What’s more, you can also equip an packing machine behind the carbonation furnace.

The charcoal briquettes that are produced by efficientpiston press briquetting machinein Nigeria are black hollow rods whose density is three times higher than common charcoal. Its calorific value is about 7000 kcal per kilo. What’s more, ash carbon content of it is significantly lower than that of common charcoal, so it is often used in barbecues.

Biomass briquettes made by piston press briquetting machine in Nigeria are important renewable energy source, and it has gained more and more people’s attention. In addition, it is easy to realize large-scale production of biomass briquettes. And it is convenient to transport and store charcoal briquettes.

There is a regulation for using a efficientpiston press briquetting machine. Before stopping the machine, the feeding port should be empty, which means all material in the feeding port has been processed. Besides, we suggest you install a ampere-voltage meter to avoid overload operation.

It is common that pilot run should be done before the piston press briquetting machine is put into use. Biomass briquette equipment is no exception. It should idle without any load for about 3 minutes at the beginning. If everything goes smoothly, you can add some material into the feeding port.