New Type rice hull briquette machine for making charcoal of Anyang

New Type rice hull briquette machine for making charcoal are used to convert powdery material into rod-shaped products under high pressure and temperature. This equipment has some requirements for the raw material. Firstly, the diameter of the raw material should be shorter than 10mm. Secondly, the moisture content of the raw material should lower than 12%. After the forming process in the biomass briquetting machine, the formed hollow rods will be put into a carbonation furnace.

New Type rice hull briquette machine for making charcoal of Anyang are able to make use of many different biomass wastes. Apart from this source of raw material, you can also plant some “energy plants” that contains a lot of lignin on unfertile farmland. Then you can take these energy plants as raw material for briquetting.

New Typerice hull briquette machine for making charcoal can compress powdery materials which contain lignin into briquettes. The molds for making briquettes can be customized. You can use this equipment to make briquettes of three different diameters: 45mm, 50mm, 55mm.

New Type rice hull briquette machine for making charcoal can be customized according to your requirements. For example, we can customize different molds according to the raw materials. Apart from this point, we can also customize the machines of different production yield.

New Typerice hull briquette machine for making charcoal employs a steep-lead feeding propeller, so the feeding speed is fast. What’s more, the extruding propeller inside the machine has a small lead, which will save energy.

The main equipment of the charcoal briquette making line include four kinds of machines: crusher machines, dryer machines, rice hull briquette machine for making charcoal and carbonation furnaces. These machines will be used one after another. Namely, the producing process goes in this way: 1.crushing 2. drying 3. forming 4. carbonation.

Charcoal briquettes are not only high-quality fuel for domestic cookers, heating stoves and industrial boilers, but also they can be used as clean fuel for power plants. If we can make good use of charcoal briquettes with New Typerice hull briquette machine for making charcoalof Anyang, it will make it possible to realize the sustainable development of energy. In addition, using charcoal briquette as fuel will help a lot to deal with the problems caused by environmental pollution.

Researching and developing biomass energy has become a hot topic in the world. The biomass charcoal briquette is one of the research achievements. Make use of biomass briquettes as fuel is cleaner than to use fossil fuels such as oil and coal. New Type rice hull briquette machine for making charcoal of Anyang is an important equipment in this industry

There will be some unforeseen circumstances while using the New Type rice hull briquette machine for making charcoal. For example, if material clogs in the feeding port, at this time, you can use a batten or a bamboo cane to solve the problem. Notice: you mustn’t use metal bars which will damage the machine.

It is common that pilot run should be done before the rice hull briquette machine for making charcoal is put into use. Biomass briquette equipment is no exception. It should idle without any load for about 3 minutes at the beginning. If everything goes smoothly, you can add some material into the feeding port.