Hot Sale rice husk biomass charcoal briquette pressing making machine for waste recycling

The Hot Sale rice husk biomass charcoal briquette pressing making machine is used in charcoal production lines. In general, the whole production line consists of a crusher machine, a drying machine, a briquette machine, a carbonation furnace and some auxiliary equipment. The finished charcoal products are of high density and good flammability.

rice husk biomass charcoal briquette pressing making machinefor waste recycling takes forestry wastes and crop wastes as material to make briquettes. The forestry wastes and crop wastes include saw dust, corn stalks, beanstalks, sorghum stalks, cotton stalks, peanut vines, sunflower stalks and so on. EP briquette machines can turn biomass wastes into treasure.

The structure of Hot Salerice husk biomass charcoal briquette pressing making machine is simple. This equipment consists of five parts: frame part, driving part, feeding port, pressing part and conveying part. Our briquette machines are easy to be operated and maintained.

The core part of the Hot Salerice husk biomass charcoal briquette pressing making machine is the screw propeller, which is made of ultratek and tungsten carbide. Hence, its service life is longer. What’s more, it can operate continuously for 40 to 60 hours. If you maintain it at regular intervals, you can use it for a long time.

The briquetting speed of Hot Sale rice husk biomass charcoal briquette pressing making machine is fast. It can make briquette of 180 centimeters per minute. The service life of the equipment is 10 times longer than common machines in the market.

At the beginning, the raw materials will be crushed into small pieces. If the moisture content of the raw materials is high, then they need to be dried. After the drying process, it comes to the core procedure of the production line: briquetting. After the raw materials are made into briquettes by Hot Sale rice husk biomass charcoal briquette pressing making machine for waste recycling, you can choose to put them into a carbonation furnace to make charcoal briquettes or pack them directly. In general, many people choose to conduct the carbonizing process because charcoal briquettes value more than “raw briquettes” that don’t go through the carbonizing process.

Charcoal briquettes are not only high-quality fuel for domestic cookers, heating stoves and industrial boilers, but also they can be used as clean fuel for power plants. If we can make good use of charcoal briquettes with Hot Sale rice husk biomass charcoal briquette pressing making machine for waste recycling, it will make it possible to realize the sustainable development of energy. In addition, using charcoal briquette as fuel will help a lot to deal with the problems caused by environmental pollution.

Developing biomass energy has driving effects on agricultural fields. For example, crop stalks, wood dust, bamboo dust, tree branches are valueless agricultural wastes. However, you can use Hot Sale rice husk biomass charcoal briquette pressing making machine to turn them into flammable briquettes which can be sold.

There is a regulation for using a Hot Salerice husk biomass charcoal briquette pressing making machine. Before stopping the machine, the feeding port should be empty, which means all material in the feeding port has been processed. Besides, we suggest you install a ampere-voltage meter to avoid overload operation.

It is common that pilot run should be done before the rice husk biomass charcoal briquette pressing making machine is put into use. Biomass briquette equipment is no exception. It should idle without any load for about 3 minutes at the beginning. If everything goes smoothly, you can add some material into the feeding port.