EP rice husk press machine from Henan province

In the industry of manufacturing charcoal from biomass wastes, EP rice husk press machine and carbonizing furnaces are very important equipment. In other words, they are core machines in a charcoal briquette production line. If the raw material is relatively large pieces or granules, a crushing machine should be equipped before the biomass briquetting machine. What’s more, if the raw material is too wet, you can put a drying machine after the crusher machine.

Our biomass briquetting equipment employs corn stalks, corncob, twigs, leaves and saw dust as raw materials. Firstly, you need to use an EP crusher machine to make those materials into small particles or powder. Then the crushed material will be compressed in the EPrice husk press machinefrom Henan province.

Ligneous materials have some inherent characteristics which determine that they can be made into briquettes as solid fuel. EPrice husk press machinefrom Henan province are designed to process these ligneous materials. Under high pressure, the spiral extruding device in the machine will press the material into briquettes.

The structure of EP rice husk press machine is compact. The finished briquettes can be used as fuel directly, or you can put them into a carbonation furnace for deep processing. Our machines can produce high-density briquettes which are solid fuel with high calorific value.

The effect of rigid connection on the propeller bed and the machine casing is obvious. With this design, the machine can resist reaction thrust, so EPrice husk press machine runs steadily  and will not make too much noise when working.

The working flow of producing charcoal briquette goes in the following order: crushing raw material, drying material, briquetting material into hollow rods, carbonizing the rods in furnaces. Throughout the whole production line , many different machines are needed. And rice husk press machinefrom Henan province and drying machines are important equipment.

The charcoal briquetting rods made by EP rice husk press machine from Henan province are used usually for outdoor barbecue. According to the characters and features of charcoal briquettes, we can also use this fuel in metallurgical industry, chemical industry, food industry, building industry, ceramic industry and stock farming.

Biomass energy has good ecological and social benefits. First of all, using biomass briquettes which are made by EP rice husk press machine as fuel will protect the environment. Secondly, it will promote continuous development in agriculture.

rice husk press machinefrom Henan province can make powdery and small granular material that contain lignin into briquettes. In order to produce high-quality briquettes, you should use material that is shorter than 3mm. Generally, a crushing machine will be used before the briquette machine to make material into suitable powder.

The EPrice husk press machine should go through the run-test process after installing. The first step you should do is to add some lubrication oil on the joints of the machine. Then you should check all the bolts. If any bolts are loose, you should tighten them up. Next, you should make sure there is no sundry in the machine.