Professional rice straw briquette machine in Turkey - All Article - Zhengzhou E.P Machinery Co., Ltd. - Biomass Briquette Machine,Wood Pellet Machine

Summary ：Our Professional rice straw briquette machine are high-quality equipment. You can use this machine to make charcoal rods that are hollow. Generally, the diameter of the rods are about 50-60 mm long, and the diameter of the hollow part is about 15-20mm. What’s more, the briquetting machines can produce cuboid-shaped and six-sided cylindrical hollow briquettes. If you want to make charcoal products of other shapes, we can customize molds for you.

Our biomass briquetting machines are made of special wear-resistant material. Thus, compared with traditional equipment, the refined briquette machines have long service life. In addition, Professional rice straw briquette machine are labor-saving equipment. In this way, the cost of investment will be less.

Professional rice straw briquette machine in Turkey are able to make use of many different biomass wastes. Apart from this source of raw material, you can also plant some “energy plants” that contains a lot of lignin on unfertile farmland. Then you can take these energy plants as raw material for briquetting.

Professional rice straw briquette machine have used the technique of piston stamping and spiral prepressing. That will make sure that the movement of the forming molds will not be damaged heavily. In other words, our briquetting equipment’s service life is longer.

This equipment is designed reasonably. What’s more, they are high-quality rice straw briquette machine with a simple structure. In addition, biomass briquette machines are small in size, so the space demand of the machine is small. Moreover, the equipment is energy-saving and labor-saving.

Professional rice straw briquette machine in Turkey

Professionalrice straw briquette machine are adaptable for forming all kinds of biomass raw materials into briquettes. The material could be powdery or granular material as long as its moisture content is between 5%-12%. Besides, it is equipped with an electric heating device that can solve the problem of blocking material.

Biomass raw material such as wood branches, bamboo dust and crop stalks need to go through four steps to be finished charcoal products. The four processing steps are crushing process, drying process, briquetting process(Professionalrice straw briquette machine and carbonizing process.

Charcoal briquettes are renewable fuel which is made from biomass wastes by Professionalrice straw briquette machinein Turkey. The calorific value of charcoal briquette is higher than common charcoal and coal. Moreover, the briquette is smokeless and odourless when it is burning. Apart from that, there is no poison generated during its burning. It can be applied for home heating and barbecuing.

Biomass charcoal briquettes made by rice straw briquette machine are clean energy. After burning, there is only little ash left. This is good for environment protection. What’s more, little ash is left means you don’t need a large place to store the ash. And the ash can be used as fertilizer.

Every time you turn on the switch of a rice straw briquette machine in Turkey, you should check the flexibility of machines’ rotating parts and make sure there is no abnormal noise. What’s more, before add material into the feeding port, the machine should idle for 2-3 minutes.

It is common that pilot run should be done before the rice straw briquette machine is put into use. Biomass briquette equipment is no exception. It should idle without any load for about 3 minutes at the beginning. If everything goes smoothly, you can add some material into the feeding port.