Henan saw dust powder machine in Vietnam

Our Henan saw dust powder machine are high-quality equipment. You can use this machine to make charcoal rods that are hollow. Generally, the diameter of the rods are about 50-60 mm long, and the diameter of the hollow part is about 15-20mm. What’s more, the briquetting machines can produce cuboid-shaped and six-sided cylindrical hollow briquettes. If you want to make charcoal products of other shapes, we can customize molds for you.

The main function of Henansaw dust powder machinein Vietnam is to make flammable briquettes from forestry wastes and crop wastes such as all kinds of stalks and wood dust through the technique of hot briquetting.

The working principle of Henan saw dust powder machine in Vietnam is quite simple. The crushed materials(twigs, stalks, straws, cotton stalks...) will be added into the feeding port. There is no need to add any adhesive in the powdery materials. Under high temperature and pressure, the materials will be pressed into high-density briquettes.

Henansaw dust powder machinein Vietnam can be used to press many different kinds of crushed biomass materials. And you can use them in continuous production lines. Besides, it consumes less energy, and it can work efficiently.

The effect of rigid connection on the propeller bed and the machine casing is obvious. With this design, the machine can resist reaction thrust, so Henansaw dust powder machine runs steadily  and will not make too much noise when working.

This is the simple instruction of the working procedure of charcoal briquette making lines. First of all, the crushing machine will crush the raw material. Then, the drying machine will dry the wet material to some degree. Next, the dried material will be compressed and formed in the saw dust powder machinein Vietnam. The last step is to carbonize the formed briquettes with carbonation furnaces.

People often use charcoal rods for heating, barbecuing and making hot pot. In the contemporary world, this kind of flammable fuel made by Henansaw dust powder machinein Vietnam is becoming more and more popular with us. Here are some advantages of it. 1.It is smokeless when burning; 2. its calorific value is high; 3. the burning time of it is quite long.

Biomass fuel’s development can restrain the price of crude oil in the international market. Biomass charcoal briquettes made by saw dust powder machinein Vietnam can take place of the traditional fossil energy such as coal and oil. Thus, the country’s import volume of oil will decrease. And the amount of carbon dioxide emitted in air by human activity will be reduced.

Every time you turn on the switch of a saw dust powder machine in Vietnam, you should check the flexibility of machines’ rotating parts and make sure there is no abnormal noise. What’s more, before add material into the feeding port, the machine should idle for 2-3 minutes.

It is common that pilot run should be done before the saw dust powder machine is put into use. Biomass briquette equipment is no exception. It should idle without any load for about 3 minutes at the beginning. If everything goes smoothly, you can add some material into the feeding port.