Low Cost saw dust pressing machine of EP Machinery

Low Cost saw dust pressing machine are used to convert powdery material into rod-shaped products under high pressure and temperature. This equipment has some requirements for the raw material. Firstly, the diameter of the raw material should be shorter than 10mm. Secondly, the moisture content of the raw material should lower than 12%. After the forming process in the biomass briquetting machine, the formed hollow rods will be put into a carbonation furnace.

There are various materials that can be used to make biomass briquettes through  saw dust pressing machine of EP Machinery. For instance, you can make use of crop stalks, wood surplus material of forestry, organic wastes of food processing industry to produce biomass briquettes that can be used as fuel.

The saw dust pressing machineof EP Machinery can make briquettes from materials like shaving board, sawdust board and crop wastes which need to be crushed firstly. The most important part of the equipment is the spiral extruding axle which is the forming part of the briquetteing machine.

It is widely acknowledged in the market that Low Cost saw dust pressing machine are  durable equipment. Here is the reason why our machines are long-lasting products. The main parts of the machines are made from special wear-resistant material.

Low Cost saw dust pressing machine are adaptable for forming all kinds of biomass raw materials into briquettes. The material could be powdery or granular material as long as its moisture content is between 5%-12%. Besides, it is equipped with an electric heating device that can solve the problem of blocking material.

At the beginning, the raw materials will be crushed into small pieces. If the moisture content of the raw materials is high, then they need to be dried. After the drying process, it comes to the core procedure of the production line: briquetting. After the raw materials are made into briquettes by Low Cost saw dust pressing machine of EP Machinery, you can choose to put them into a carbonation furnace to make charcoal briquettes or pack them directly. In general, many people choose to conduct the carbonizing process because charcoal briquettes value more than “raw briquettes” that don’t go through the carbonizing process.

The charcoal sticks made by Low Costsaw dust pressing machineof EP Machinery are widely used. For instance, charcoal briquettes can be used for heating in winter in the northern area. What’s more, you can use them to warm greenhouses when it is cold. In addition, you can also use those briquettes as fuel to cook.

The ash of burning biomass briquettes is a kind of high-quality organic potash fertilizer. As a new-type fuel, biomass briquettes are widely acceptable by people. Compared with traditional fuels, biomass briquettes that are made by Low Costsaw dust pressing machine are more eco-friendly.

We have a lot of experience in doing business with foreigners who come from all over the world. Our company’s aim is to supply high-class saw dust pressing machineof EP Machinery and production lines to our clients. We are looking forward to establishing partnership with you.

It is common that pilot run should be done before the saw dust pressing machine is put into use. Biomass briquette equipment is no exception. It should idle without any load for about 3 minutes at the beginning. If everything goes smoothly, you can add some material into the feeding port.