New Design sawdust briquette machinery in Indonesia - All Article - Zhengzhou E.P Machinery Co., Ltd. - Biomass Briquette Machine,Wood Pellet Machine

Summary ：In the industry of manufacturing charcoal from biomass wastes, New Design sawdust briquette machinery and carbonizing furnaces are very important equipment. In other words, they are core machines in a charcoal briquette production line. If the raw material is relatively large pieces or granules, a crushing machine should be equipped before the biomass briquetting machine. What’s more, if the raw material is too wet, you can put a drying machine after the crusher machine.

The New Design sawdust briquette machinery is well designed. The structure of a briquette machine is simple and reasonable. And it is easy to operate the briquette machine. What’s more, the rate of finished products of our briquette machines is pretty high. That means our machines are high-efficiency equipment.

Our biomass briquetting equipment employs corn stalks, corncob, twigs, leaves and saw dust as raw materials. Firstly, you need to use an EP crusher machine to make those materials into small particles or powder. Then the crushed material will be compressed in the New Designsawdust briquette machineryin Indonesia.

The sawdust briquette machinery in Indonesia can make briquettes from materials like shaving board, sawdust board and crop wastes which need to be crushed firstly. The most important part of the equipment is the spiral extruding axle which is the forming part of the briquetteing machine.

New Design sawdust briquette machinery can be customized according to your requirements. For example, we can customize different molds according to the raw materials. Apart from this point, we can also customize the machines of different production yield.

New Design sawdust briquette machinery in Indonesia’s pinch roller has a function of automatic regulating. This function will adopt bi-rolling principle of the thrust bearings to automatically adjust pressure, so that the material in the machine will not agglomerate. All in all, the function will guarantee the forming effect.

In general, to make charcoal briquettes, crushing process, drying process, briquetting process and carbonizing process will be conducted orderly. Crushing machines are used to crush some material that are large and can not be formed by the New Designsawdust briquette machinery directly. There are different types of crusher machines of our company. You can choose the suitable one according to the raw material that you plan to use.

The charcoal briquettes that are produced by New Design sawdust briquette machinery in Indonesia are black hollow rods whose density is three times higher than common charcoal. Its calorific value is about 7000 kcal per kilo. What’s more, ash carbon content of it is significantly lower than that of common charcoal, so it is often used in barbecues.

New Design sawdust briquette machinery in Indonesia

Biomass energy has good ecological and social benefits. First of all, using biomass briquettes which are made by New Design sawdust briquette machinery as fuel will protect the environment. Secondly, it will promote continuous development in agriculture.

The salesmen of EP Machinery are all very experienced. They can give your best advice and customize best equipment for you according to your requirements. In addition, New Design sawdust briquette machinery you purchase will be checked thoroughly before delivery.

It is common that pilot run should be done before the sawdust briquette machinery is put into use. Biomass briquette equipment is no exception. It should idle without any load for about 3 minutes at the beginning. If everything goes smoothly, you can add some material into the feeding port.