search

Professional sawdust briquette machinery of EP factory

2019-10-26 18:56:00
czqwjb009
Original
631
Summary :Our professional sawdust briquette machinery are high-quality equipment. We can customize equipment according to your requirements.

To some degree, professional sawdust briquette machinery are eco-friendly equipment, so the investment prospect of this kind of machine is promising. Currently, biomass briquetting equipment is widely used in the fields of industrial engineering, agricultural industry, stock farming, chemical industry, metallurgy, heating and so on.

Biomass briquette machines are suitable to process a lot of different raw materials. If you want to use E.P professional sawdust briquette machinery of our factory to make hexagonal charcoal briquettes, you need a batch-type carbonation furnace. What's more, you should make sure that the moisture content of the raw material is among 5%-12%. If it is too wet, then you can dry it with a drying machine. In addition, the more lignin the raw material contains, the higher the carbon content of the finished charcoal briquettes will be.

Professional sawdust briquette machines have adopted the technique of piston stamping and spiral prepressing. That will make sure that the movement of the forming molds will not be damaged heavily. In other words, our briquetting equipment’s service life is longer.

Each professional sawdust briquette machinery of EP factory is equipped with an automatic electric heating appliance. To some extent, this heating appliance can adjust moisture content of the material. As a result, the forming effect of the machine is guaranteed and working efficiency of the machine has been improved.

Professional sawdust briquette machinery employs a steep-lead feeding propeller, so the feeding speed is fast. What’s more, the extruding propeller inside the machine has a small lead, which will save energy.

This is the simple instruction of the working procedure of charcoal briquette making lines. First of all, the crushing machine will crush the raw material into fine powder. Then, the drying machine will dry the wet material until it is dry enough. Next, the dried material will be compressed and formed in the sawdust briquette machinery of EP factory. The last step is to carbonize the formed briquettes with carbonation furnaces.

The charcoal briquettes that are produced by Professional sawdust briquette machinery of EP factory are black hollow rods whose density is three times higher than common charcoal. Its calorific value is about 7000 kcal per kilo. What’s more, ash carbon content of it is significantly lower than that of common charcoal, so it is often used to cook barbecues.

Biomass charcoal briquettes made by sawdust briquette machinery are clean energy. After burning, there is only little ash left. This is good for environment protection. What’s more, little ash is left means you don’t need a large place to store ash which can be used as fertilizer.

We have a lot of experience in doing business with foreigners from all over the world. Our company’s aim is to supply high-class sawdust briquette machinery and production lines to our clients. We are looking forward to establishing partnership with you.

The professional sawdust briquette machinery should go through the run-test process after installation. The first step you should do is to add some lubrication oil on the joints of the machine. Then you should check all the bolts of the machine. If any bolts are loose, you should tighten them up immediately. Next, you should make sure there is no sundry in the machine.

Professional sawdust briquette machinery of EP factory

Write a Comment
Comment will be posted once reviewed.