Hot Selling sawdust briquette press from experienced factory

In the industry of manufacturing charcoal from biomass wastes, Hot Selling sawdust briquette press and carbonizing furnaces are very important equipment. In other words, they are core machines in a charcoal briquette production line. If the raw material is relatively large pieces or granules, a crushing machine should be equipped before the biomass briquetting machine. What’s more, if the raw material is too wet, you can put a drying machine after the crusher machine.

There are various materials that can be used to make biomass briquettes through sawdust briquette pressfrom experienced factory. For instance, you can make use of crop stalks, wood surplus material of forestry, organic wastes of food processing industry to produce biomass briquettes that can be used as fuel.

Ligneous materials have some inherent characteristics which determine that they can be made into briquettes as solid fuel. Hot Sellingsawdust briquette pressfrom experienced factory are designed to process these ligneous materials. Under high pressure, the spiral extruding device in the machine will press the material into briquettes.

The structure of Hot Selling sawdust briquette press is compact. The finished briquettes can be used as fuel directly, or you can put them into a carbonation furnace for deep processing. Our machines can produce high-density briquettes which are solid fuel with high calorific value.

The effect of rigid connection on the propeller bed and the machine casing is obvious. With this design, the machine can resist reaction thrust, so Hot Sellingsawdust briquette press runs steadily  and will not make too much noise when working.

At the beginning, the raw materials will be crushed into small pieces. If the moisture content of the raw materials is high, then they need to be dried. After the drying process, it comes to the core procedure of the production line: briquetting. After the raw materials are made into briquettes by Hot Selling sawdust briquette press from experienced factory, you can choose to put them into a carbonation furnace to make charcoal briquettes or pack them directly. In general, many people choose to conduct the carbonizing process because charcoal briquettes value more than “raw briquettes” that don’t go through the carbonizing process.

The charcoal sticks made by Hot Selling sawdust briquette press from experienced factory are widely used. For instance, charcoal briquettes can be used for heating in winter in the northern area. What’s more, you can use them to warm greenhouses when it is cold. In addition, you can also use those briquettes as fuel to cook.

Biomass charcoal briquettes made by sawdust briquette press are clean energy. After burning, there is only little ash left. This is good for environment protection. What’s more, little ash is left means you don’t need a large place to store the ash. And the ash can be used as fertilizer.

The electric controller of the Hot Sellingsawdust briquette pressfrom experienced factory adopts high-quality electrical apparatus elements. The overload protector and the leakage protector will protect the machine and the the operator. In addition, to maintain the equipment, you should inject lubrication oil on the rolling bearing regularly.

There are something you should know about installing a sawdust briquette press from experienced factory. Firstly, before installing, all the components of the machine should be cleaned. Secondly, make sure there is no broken parts in the machine. Thirdly, the machine should be fixed on the ground firmly.