Customizable sawdust briquetting press machine with best solutions

In the industry of manufacturing charcoal from biomass wastes, Customizable sawdust briquetting press machine and carbonizing furnaces are very important equipment. In other words, they are core machines in a charcoal briquette production line. If the raw material is relatively large pieces or granules, a crushing machine should be equipped before the biomass briquetting machine. What’s more, if the raw material is too wet, you can put a drying machine after the crusher machine.

EP biomass briquetting machines can take many biomass wastes as material. Some of them need to be crushed into small particles before the briquetteing process. The most common materials are saw dust and rice husk. These two kinds of materials are small enough, so it is not necessary to crush them before putting them into the Customizablesawdust briquetting press machine.

Ligneous materials have some inherent characteristics which determine that they can be made into briquettes as solid fuel. Customizable sawdust briquetting press machine with best solutions are designed to process these ligneous materials. Under high pressure, the spiral extruding device in the machine will press the material into briquettes.

The core part of the Customizable sawdust briquetting press machine is the screw propeller, which is made of ultratek and tungsten carbide. Hence, its service life is longer. What’s more, it can operate continuously for 40 to 60 hours. If you maintain it at regular intervals, you can use it for a long time.

The effect of rigid connection on the propeller bed and the machine casing is obvious. With this design, the machine can resist reaction thrust, so Customizable sawdust briquetting press machine  runs steadily  and will not make too much noise when working.

Firstly, you should use a crusher machine to crush the raw material according to the requirements. Secondly, if the water content of the crushed material is higher than 12%, a drying machine need to dry it. The moisture content of the material should be among 6%-12%. Thirdly, Customizable sawdust briquetting press machine with best solutions will form the material into hollow rods. Finally, the hollow rods will become charcoal briquettes in the carbonation furnaces.

The charcoal sticks made by Customizablesawdust briquetting press machinewith best solutions are widely used. For instance, charcoal briquettes can be used for heating in winter in the northern area. What’s more, you can use them to warm greenhouses when it is cold. In addition, you can also use those briquettes as fuel to cook.

The ash of burning biomass briquettes is a kind of high-quality organic potash fertilizer. As a new-type fuel, biomass briquettes are widely acceptable by people. Compared with traditional fuels, biomass briquettes that are made by Customizable sawdust briquetting press machine are more eco-friendly.

We have a lot of experience in doing business with foreigners who come from all over the world. Our company’s aim is to supply high-class sawdust briquetting press machine with best solutions and production lines to our clients. We are looking forward to establishing partnership with you.

The Customizablesawdust briquetting press machine should go through the run-test process after installing. The first step you should do is to add some lubrication oil on the joints of the machine. Then you should check all the bolts. If any bolts are loose, you should tighten them up. Next, you should make sure there is no sundry in the machine.