Automatic sawdust briquetting press machine of EP factory - All Article - Zhengzhou E.P Machinery Co., Ltd. - Biomass Briquette Machine,Wood Pellet Machine

Summary ：In the industry of manufacturing charcoal from biomass wastes, Automatic sawdust briquetting press machine and carbonizing furnaces are very important equipment. In other words, they are core machines in a charcoal briquette production line. If the raw material is relatively large pieces or granules, a crushing machine should be equipped before the biomass briquetting machine. What’s more, if the raw material is too wet, you can put a drying machine after the crusher machine.

The Automatic sawdust briquetting press machine are high-efficiency and energy-saving equipment. Nowadays, people are paying more and more attention to environment protection. And biomass briquetting machines can turn some plant wastes into useful charcoal, which will protect environment indirectly. Therefore, biomass briquette machines play an important role in this field.

Our biomass briquetting equipment employs corn stalks, corncob, twigs, leaves and saw dust as raw materials. Firstly, you need to use an EP crusher machine to make those materials into small particles or powder. Then the crushed material will be compressed in the Automaticsawdust briquetting press machineof EP factory.

Automaticsawdust briquetting press machine have used the technique of piston stamping and spiral prepressing. That will make sure that the movement of the forming molds will not be damaged heavily. In other words, our briquetting equipment’s service life is longer.

Automaticsawdust briquetting press machineof EP factory can be used to press many different kinds of crushed biomass materials. And you can use them in continuous production lines. Besides, it consumes less energy, and it can work efficiently.

Automaticsawdust briquetting press machineof EP factory adopt v-belt drive which can make the machine work smoothly. In addition, v-belt drive can also act as overload protection device. Moreover, there are two connection modes of the machine head and the cylinder body: insert connection and bolted connection. And you can choose the best connection mode according actual situation.

Automatic sawdust briquetting press machine of EP factory

Biomass raw material such as wood branches, bamboo dust and crop stalks need to go through four steps to be finished charcoal products. The four processing steps are crushing process, drying process, briquetting process(Automatic sawdust briquetting press machine and carbonizing process.

Charcoal rods which are produced by Automatic sawdust briquetting press machine of EP factory can be used in steel mills in order to make high-quality steel. In a word, charcoal briquettes are widely used in different industries, and the market demand of it also becomes large. As a result, biomass briquette machines are widely praised.in the international market. The usage of biomass briquette machines has greatly reduced the cost of making people's charcoal sticks, while profit multiples at the same time.

Biomass fuel’s development can restrain the price of crude oil in the international market. Biomass charcoal briquettes made by sawdust briquetting press machine of EP factory can take place of the traditional fossil energy such as coal and oil. Thus, the country’s import volume of oil will decrease. And the amount of carbon dioxide emitted in air by human activity will be reduced.

Every time you turn on the switch of a sawdust briquetting press machineof EP factory, you should check the flexibility of machines’ rotating parts and make sure there is no abnormal noise. What’s more, before add material into the feeding port, the machine should idle for 2-3 minutes.

There are something you should know about installing a sawdust briquetting press machineof EP factory. Firstly, before installing, all the components of the machine should be cleaned. Secondly, make sure there is no broken parts in the machine. Thirdly, the machine should be fixed on the ground firmly.