well-designed sawdust charcoal machine with long service life

well-designed sawdust charcoal machine are used to convert powdery material into rod-shaped products under high pressure and temperature. This equipment has some requirements for the raw material. Firstly, the diameter of the raw material should be shorter than 10mm. Secondly, the moisture content of the raw material should lower than 12%. After the forming process in the biomass briquetting machine, the formed hollow rods will be put into a carbonation furnace.

Wood dust, crop stalks, peanut shells, branches and rice husk are common materials for well-designedsawdust charcoal machine. These materials will be made into briquettes. Next, the processed briquettes will be carbonized in a furnace. After this step, charcoal briquettes will finally be made.

The sawdust charcoal machinewith long service life can make briquettes from materials like shaving board, sawdust board and crop wastes which need to be crushed firstly. The most important part of the equipment is the spiral extruding axle which is the forming part of the briquetteing machine.

The machines’ stability and durability is pretty high. It is very important to lubricate the equipment regularly. As long as there is no lack of oil in the joints of the machine, the sawdust charcoal machine can be used for many years.

well-designed sawdust charcoal machine are adaptable for forming all kinds of biomass raw materials into briquettes. The material could be powdery or granular material as long as its moisture content is between 5%-12%. Besides, it is equipped with an electric heating device that can solve the problem of blocking material.

The working flow of producing charcoal briquette goes in the following order: crushing raw material, drying material, briquetting material into hollow rods, carbonizing the rods in furnaces. Throughout the whole production line , many different machines are needed. And sawdust charcoal machinewith long service life and drying machines are important equipment.

Charcoal rods which are produced by well-designed sawdust charcoal machine with long service life can be used in steel mills in order to make high-quality steel. In a word, charcoal briquettes are widely used in different industries, and the market demand of it also becomes large. As a result, biomass briquette machines are widely praised.in the international market. The usage of biomass briquette machines has greatly reduced the cost of making people's charcoal sticks, while profit multiples at the same time.

The ash of burning biomass briquettes is a kind of high-quality organic potash fertilizer. As a new-type fuel, biomass briquettes are widely acceptable by people. Compared with traditional fuels, biomass briquettes that are made by well-designed sawdust charcoal machine are more eco-friendly.

EP Machinery Company has 9 years’ experience in manufacturing sawdust charcoal machine. Over the past years, we have helped many customers start their business in this industry. Importantly, we can provide you with high-quality machines and first-class service.

It is common that pilot run should be done before the sawdust charcoal machine is put into use. Biomass briquette equipment is no exception. It should idle without any load for about 3 minutes at the beginning. If everything goes smoothly, you can add some material into the feeding port.