well-designed sawdust compactor machine Manufacurer

The well-designed sawdust compactor machine is well designed. The structure of a briquette machine is simple and reasonable. And it is easy to operate the briquette machine. What’s more, the rate of finished products of our briquette machines is pretty high. That means our machines are high-efficiency equipment.

EP biomass briquetting machines can take many biomass wastes as material. Some of them need to be crushed into small particles before the briquetteing process. The most common materials are saw dust and rice husk. These two kinds of materials are small enough, so it is not necessary to crush them before putting them into the well-designedsawdust compactor machine.

Ligneous materials have some inherent characteristics which determine that they can be made into briquettes as solid fuel. well-designedsawdust compactor machineManufacurer are designed to process these ligneous materials. Under high pressure, the spiral extruding device in the machine will press the material into briquettes.

well-designedsawdust compactor machineManufacurer can be used to press many different kinds of crushed biomass materials. And you can use them in continuous production lines. Besides, it consumes less energy, and it can work efficiently.

The briquetting speed of well-designed sawdust compactor machine is fast. It can make briquette of 180 centimeters per minute. The service life of the equipment is 10 times longer than common machines in the market.

This is the simple instruction of the working procedure of charcoal briquette making lines. First of all, the crushing machine will crush the raw material. Then, the drying machine will dry the wet material to some degree. Next, the dried material will be compressed and formed in the sawdust compactor machineManufacurer. The last step is to carbonize the formed briquettes with carbonation furnaces.

The usage amount of charcoal briquettes made by well-designedsawdust compactor machineManufacurer is on the rise gradually. Charcoal sticks are increasingly used in our daily life and industrial production. On the one hand, charcoal sticks can be used in our favorite barbecues. Because charcoal rods are smokeless and odourless, they have become more and more favorable; On the other hand, charcoal briquetting sticks are ideal material for warming in winter.

Biomass briquettes made by sawdust compactor machineManufacurer are important renewable energy source, and it has gained more and more people’s attention. In addition, it is easy to realize large-scale production of biomass briquettes. And it is convenient to transport and store charcoal briquettes.

The salesmen of EP Machinery are all very experienced. They can give your best advice and customize best equipment for you according to your requirements. In addition, well-designedsawdust compactor machine you purchase will be checked thoroughly before delivery.

The well-designed sawdust compactor machine should go through the run-test process after installing. The first step you should do is to add some lubrication oil on the joints of the machine. Then you should check all the bolts. If any bolts are loose, you should tighten them up. Next, you should make sure there is no sundry in the machine.