Practical sawdust compactor machine from Henan province

In the industry of manufacturing charcoal from biomass wastes, Practical sawdust compactor machine and carbonizing furnaces are very important equipment. In other words, they are core machines in a charcoal briquette production line. If the raw material is relatively large pieces or granules, a crushing machine should be equipped before the biomass briquetting machine. What’s more, if the raw material is too wet, you can put a drying machine after the crusher machine.

Biomass briquette machines are suitable to process a lot of different raw materials. It is not true that briquette machines can deal with all kinds of materials. If you want to use Practical sawdust compactor machine from Henan province to make charcoal sticks, you should make sure that the moisture content of the raw material is among 5%-12%. If it is too wet, then you can dry it with a drying machine. In addition, the more lignin the raw material contains, the higher the carbon content of the finished charcoal sticks will be.

Ligneous materials have some inherent characteristics which determine that they can be made into briquettes as solid fuel. Practical sawdust compactor machine from Henan province are designed to process these ligneous materials. Under high pressure, the spiral extruding device in the machine will press the material into briquettes.

The core part of the Practical sawdust compactor machine is the screw propeller, which is made of ultratek and tungsten carbide. Hence, its service life is longer. What’s more, it can operate continuously for 40 to 60 hours. If you maintain it at regular intervals, you can use it for a long time.

The effect of rigid connection on the propeller bed and the machine casing is obvious. With this design, the machine can resist reaction thrust, so Practicalsawdust compactor machine runs steadily  and will not make too much noise when working.

A charcoal briquette production line basically consists of a crushing machine, a dryer, a Practical sawdust compactor machine and a carbonation furnace. These machines are placed in order to make high-quality charcoal briquettes. What’s more, you can also equip an packing machine behind the carbonation furnace.

The usage amount of charcoal briquettes made by Practicalsawdust compactor machinefrom Henan province is on the rise gradually. Charcoal sticks are increasingly used in our daily life and industrial production. On the one hand, charcoal sticks can be used in our favorite barbecues. Because charcoal rods are smokeless and odourless, they have become more and more favorable; On the other hand, charcoal briquetting sticks are ideal material for warming in winter.

Biomass fuel is an important renewable energy resource. Nowadays, under the situation that fossil fuel becomes less and less, biomass energy aroused people’s wide concern. Charcoal briquettes made by Practicalsawdust compactor machine are the most common biomass fuel whose ash content and sulphur content is relatively low. That means it will not cause many pollutants to use charcoal as fuel.

There is a regulation for using a Practical sawdust compactor machine. Before stopping the machine, the feeding port should be empty, which means all material in the feeding port has been processed. Besides, we suggest you install a ampere-voltage meter to avoid overload operation.

The Practical sawdust compactor machine should go through the run-test process after installing. The first step you should do is to add some lubrication oil on the joints of the machine. Then you should check all the bolts. If any bolts are loose, you should tighten them up. Next, you should make sure there is no sundry in the machine.