highly automatic sawdust compress machine from experienced factory

In the industry of manufacturing charcoal from biomass wastes, highly automatic sawdust compress machine and carbonizing furnaces are very important equipment. In other words, they are core machines in a charcoal briquette production line. If the raw material is relatively large pieces or granules, a crushing machine should be equipped before the biomass briquetting machine. What’s more, if the raw material is too wet, you can put a drying machine after the crusher machine.

sawdust compress machinefrom experienced factory takes forestry wastes and crop wastes as material to make briquettes. The forestry wastes and crop wastes include saw dust, corn stalks, beanstalks, sorghum stalks, cotton stalks, peanut vines, sunflower stalks and so on. EP briquette machines can turn biomass wastes into treasure.

highly automaticsawdust compress machinefrom experienced factory employ the working principle of extruding materials under high pressure and high temperature. The components of EP biomass briquetting equipment are made of high-quality material.

Each highly automatic sawdust compress machine from experienced factory is equipped with an automatic electric heating appliance. To some extent, this heating appliance can adjust moisture content of the material. As a result, the forming effect of the machine is guaranteed and working efficiency of the machine has been improved.

highly automaticsawdust compress machinefrom experienced factory’s pinch roller has a function of automatic regulating. This function will adopt bi-rolling principle of the thrust bearings to automatically adjust pressure, so that the material in the machine will not agglomerate. All in all, the function will guarantee the forming effect.

The main equipment of the charcoal briquette making line include four kinds of machines: crusher machines, dryer machines, sawdust compress machine and carbonation furnaces. These machines will be used one after another. Namely, the producing process goes in this way: 1.crushing 2. drying 3. forming 4. carbonation.

The charcoal briquettes that are produced by highly automatic sawdust compress machine from experienced factory are black hollow rods whose density is three times higher than common charcoal. Its calorific value is about 7000 kcal per kilo. What’s more, ash carbon content of it is significantly lower than that of common charcoal, so it is often used in barbecues.

Biomass energy has good ecological and social benefits. First of all, using biomass briquettes which are made by highly automatic sawdust compress machine as fuel will protect the environment. Secondly, it will promote continuous development in agriculture.

There is a regulation for using a highly automaticsawdust compress machine. Before stopping the machine, the feeding port should be empty, which means all material in the feeding port has been processed. Besides, we suggest you install a ampere-voltage meter to avoid overload operation.

It is common that pilot run should be done before the sawdust compress machine is put into use. Biomass briquette equipment is no exception. It should idle without any load for about 3 minutes at the beginning. If everything goes smoothly, you can add some material into the feeding port.