highly efficient sawdust stick making machine of EP Machinery

The highly efficient sawdust stick making machine can turn forest wastes and crop wastes which contain wood fiber into flammable briquettes through the technique of hot compression molding. Compared with the similar machines of other manufacturers, the biomass briquette machines of our factory are more advanced.

Our biomass briquetting equipment employs corn stalks, corncob, twigs, leaves and saw dust as raw materials. Firstly, you need to use an EP crusher machine to make those materials into small particles or powder. Then the crushed material will be compressed in the highly efficient sawdust stick making machine of EP Machinery.

highly efficientsawdust stick making machine can compress powdery materials which contain lignin into briquettes. The molds for making briquettes can be customized. You can use this equipment to make briquettes of three different diameters: 45mm, 50mm, 55mm.

This equipment is designed reasonably. What’s more, they are high-quality  sawdust stick making machine with a simple structure. In addition, biomass briquette machines are small in size, so the space demand of the machine is small. Moreover, the equipment is energy-saving and labor-saving.

highly efficientsawdust stick making machineof EP Machinery adopt v-belt drive which can make the machine work smoothly. In addition, v-belt drive can also act as overload protection device. Moreover, there are two connection modes of the machine head and the cylinder body: insert connection and bolted connection. And you can choose the best connection mode according actual situation.

Firstly, you should use a crusher machine to crush the raw material according to the requirements. Secondly, if the water content of the crushed material is higher than 12%, a drying machine need to dry it. The moisture content of the material should be among 6%-12%. Thirdly, highly efficientsawdust stick making machineof EP Machinery will form the material into hollow rods. Finally, the hollow rods will become charcoal briquettes in the carbonation furnaces.

The charcoal briquettes that are produced by highly efficientsawdust stick making machineof EP Machinery are black hollow rods whose density is three times higher than common charcoal. Its calorific value is about 7000 kcal per kilo. What’s more, ash carbon content of it is significantly lower than that of common charcoal, so it is often used in barbecues.

Biomass briquettes produced by highly efficientsawdust stick making machine don’t contain any phosphorus. Therefore, when the briquettes are burning, no sulfur dioxide  and phosphorus pentoxide will be generated. As a result, no acid rain will be formed. We can say using biomass briquettes as fuel is a way to protect the environment.

EP Machinery Company has 9 years’ experience in manufacturing sawdust stick making machine. Over the past years, we have helped many customers start their business in this industry. Importantly, we can provide you with high-quality machines and first-class service.

It is common that pilot run should be done before the sawdust stick making machine is put into use. Biomass briquette equipment is no exception. It should idle without any load for about 3 minutes at the beginning. If everything goes smoothly, you can add some material into the feeding port.