environmental friendly sawdust stick making machine in Nigeria

In the industry of manufacturing charcoal from biomass wastes, environmental friendly sawdust stick making machine and carbonizing furnaces are very important equipment. In other words, they are core machines in a charcoal briquette production line. If the raw material is relatively large pieces or granules, a crushing machine should be equipped before the biomass briquetting machine. What’s more, if the raw material is too wet, you can put a drying machine after the crusher machine.

EP biomass briquetting machines can take many biomass wastes as material. Some of them need to be crushed into small particles before the briquetteing process. The most common materials are saw dust and rice husk. These two kinds of materials are small enough, so it is not necessary to crush them before putting them into the environmental friendlysawdust stick making machine.

The sawdust stick making machinein Nigeria can make briquettes from materials like shaving board, sawdust board and crop wastes which need to be crushed firstly. The most important part of the equipment is the spiral extruding axle which is the forming part of the briquetteing machine.

The machines’ stability and durability is pretty high. It is very important to lubricate the equipment regularly. As long as there is no lack of oil in the joints of the machine, the sawdust stick making machine can be used for many years.

The operating method of environmental friendly sawdust stick making machine is simple, so it is easy to use the machine. With high degree of automation, you don’ t need to hire many workers to operate the machine. In general, one worker will be enough. You can choose to feed material manually or by a conveyor.

The main equipment of the charcoal briquette making line include four kinds of machines: crusher machines, dryer machines, sawdust stick making machine and carbonation furnaces. These machines will be used one after another. Namely, the producing process goes in this way: 1.crushing 2. drying 3. forming 4. carbonation.

The charcoal briquettes that are produced by environmental friendlysawdust stick making machinein Nigeria are black hollow rods whose density is three times higher than common charcoal. Its calorific value is about 7000 kcal per kilo. What’s more, ash carbon content of it is significantly lower than that of common charcoal, so it is often used in barbecues.

Biomass charcoal briquettes made by sawdust stick making machine are clean energy. After burning, there is only little ash left. This is good for environment protection. What’s more, little ash is left means you don’t need a large place to store the ash. And the ash can be used as fertilizer.

Every time you turn on the switch of a sawdust stick making machinein Nigeria, you should check the flexibility of machines’ rotating parts and make sure there is no abnormal noise. What’s more, before add material into the feeding port, the machine should idle for 2-3 minutes.

The environmental friendlysawdust stick making machine should go through the run-test process after installing. The first step you should do is to add some lubrication oil on the joints of the machine. Then you should check all the bolts. If any bolts are loose, you should tighten them up. Next, you should make sure there is no sundry in the machine.