search

non-polluting stalk briquette machine provided by factory

2019-10-19 22:56:00
czqwjb009
Original
512
Summary :Our biomass briquetting machines are made of special wear-resistant material. Thus, compared with traditional equipment, the refined briquette machines have long service life.

Non-polluting stalk briquette machines are used to convert powdery material into rod-shaped products under high pressure and temperature. There are some requirements on the raw material that is used to make biomass briquettes. Firstly, the diameter of the raw material should be ≤ 10mm. Secondly, the moisture content of the raw material should about 12%. After the forming process in the biomass briquetting machine, the formed hollow rods will be put into a carbonation furnace.

Biomass briquette machines are suitable to process a lot of different raw materials. It is not true that briquette machines can deal with all kinds of materials. If you want to use non-polluting stalk briquette machine provided by factory to make charcoal sticks, you should make sure that the moisture content of the raw material is among 5%-12%. If it is too wet,  a drying machine could help to dry the raw material. In addition, the more lignin the raw material contains, the higher the carbon content of the finished charcoal sticks will be.

The working principle of stalk briquette machine provided by factory is to make powdery ligneous materials into rod-shaped solid fuel under the condition of high pressure and temperature. And the inside temperature of the machine is adjustable.

Each non-polluting stalk briquette machine provided by our factory is equipped with an automatic electric heating appliance. To some extent, this heating appliance can adjust moisture content of the material. As a result, the forming effect of the machine is guaranteed and working efficiency of the machine has been improved.

The operating method of non-polluting stalk briquette machine is simple, so it is easy to use the machine. With high degree of automation, you don’ t need to hire many workers to operate the machine. In general, one worker will be enough. You can choose to feed material manually or by a conveyor.

The main equipment of the charcoal briquette making line include four kinds of machines: crusher machines, dryer machines, stalk briquette machine and carbonation furnaces. These machines will be used one after another. Namely, the producing process goes in this way: 1.crushing 2. drying 3. forming 4. carbonation.

non-polluting stalk briquette machine provided by factory

The solid fuel(charcoal briquette) that is made by non-pollutingstalk briquette machineprovided by factory is of high calorific value. And it is easy to light the charcoal briquettes. Compared with ordinary timber, charcoal fuel’s combustion period is longer, and much less pollutants are generated during burning. All in all, the use of charcoal sticks can partly solve the problem of energy shortage.

Developing biomass energy has driving effects on agricultural fields. For example, crop stalks, wood dust, bamboo dust, tree branches are valueless agricultural wastes. However, you can use non-polluting stalk briquette machine to turn them into flammable briquettes which can be sold.

Every time you turn on the switch of a stalk briquette machine provided by factory, you should check the flexibility of machines’ rotating parts and make sure there is no abnormal noise. What’s more, before add material into the feeding port, the machine should idle for 2-3 minutes.

It is common that pilot run should be done before the stalk briquette machine is put into use. Biomass briquette equipment is no exception. It should idle without any load for about 3 minutes at the beginning. If everything goes smoothly, you can add some material into the feeding port.

Write a Comment
Comment will be posted once reviewed.