search

Customizable stalk briquette machine in Nigeria

2019-11-11 22:11:00
czqwjb009
Original
464
Summary :Our Customizable stalk briquette machine are high-quality equipment. You can use this machine to make charcoal rods that are hollow. Generally, the diameter of the rods are about 50-60 mm long, and the diameter of the hollow part is about 15-20mm. What’s more, the briquetting machines can produce cuboid-shaped and six-sided cylindrical hollow briquettes. If you want to make charcoal products of other shapes, we can customize molds for you.

Our biomass briquetting machines are made of special wear-resistant material. Thus, compared with traditional equipment, the refined briquette machines have long service life. In addition, Customizable stalk briquette machine are labor-saving equipment. In this way, the cost of investment will be less.

Many materials can be used by Customizable stalk briquette machine in Nigeria. Wood shavings, bamboo shavings, branches, twigs, wood offcut and fruit shells are good materials. There is one thing that you should notice is that they are hard material. Thus, the crushing procedure is necessary before forming procedure. And you need a powerful crusher to process those hard materials.

The stalk briquette machinein Nigeria can make briquettes from materials like shaving board, sawdust board and crop wastes which need to be crushed firstly. The most important part of the equipment is the spiral extruding axle which is the forming part of the briquetteing machine.

Customizablestalk briquette machinein Nigeria can be used to press many different kinds of crushed biomass materials. And you can use them in continuous production lines. Besides, it consumes less energy, and it can work efficiently.

The major components of a Customizablestalk briquette machine are high-quality. They are made from wear-resistant material. With these components, the service life of the briquetting equipment has been prolonged.

Firstly, you should use a crusher machine to crush the raw material according to the requirements. Secondly, if the water content of the crushed material is higher than 12%, a drying machine need to dry it. The moisture content of the material should be among 6%-12%. Thirdly, Customizablestalk briquette machinein Nigeria will form the material into hollow rods. Finally, the hollow rods will become charcoal briquettes in the carbonation furnaces.

People often use charcoal rods for heating, barbecuing and making hot pot. In the contemporary world, this kind of flammable fuel made by Customizablestalk briquette machinein Nigeria is becoming more and more popular with us. Here are some advantages of it. 1.It is smokeless when burning; 2. its calorific value is high; 3. the burning time of it is quite long.

Biomass fuel’s development can restrain the price of crude oil in the international market. Biomass charcoal briquettes made by stalk briquette machinein Nigeria can take place of the traditional fossil energy such as coal and oil. Thus, the country’s import volume of oil will decrease. And the amount of carbon dioxide emitted in air by human activity will be reduced.

Customizable stalk briquette machine in Nigeria

stalk briquette machine in Nigeria can make powdery and small granular material that contain lignin into briquettes. In order to produce high-quality briquettes, you should use material that is shorter than 3mm. Generally, a crushing machine will be used before the briquette machine to make material into suitable powder.

It is common that pilot run should be done before the stalk briquette machine is put into use. Biomass briquette equipment is no exception. It should idle without any load for about 3 minutes at the beginning. If everything goes smoothly, you can add some material into the feeding port.

Write a Comment
Comment will be posted once reviewed.