Hot Sale straw briquette log machine in Nigeria

To some degree, Hot Sale straw briquette log machine are eco-friendly equipment, so the investment prospect of this kind of machine is promising. Currently, biomass briquetting equipment is widely used in the fields of industrial engineering, agricultural industry, stock farming, chemical industry, metallurgy, heating and so on.

Wood dust, crop stalks, peanut shells, branches and rice husk are common materials for Hot Sale straw briquette log machine. These materials will be made into briquettes. Next, the processed briquettes will be carbonized in a furnace. After this step, charcoal briquettes will finally be made.

The working principle of Hot Sale straw briquette log machine in Nigeria is quite simple. The crushed materials(twigs, stalks, straws, cotton stalks...) will be added into the feeding port. There is no need to add any adhesive in the powdery materials. Under high temperature and pressure, the materials will be pressed into high-density briquettes.

Hot Sale straw briquette log machine can be customized according to your requirements. For example, we can customize different molds according to the raw materials. Apart from this point, we can also customize the machines of different production yield.

Hot Sale straw briquette log machine in Nigeria adopt v-belt drive which can make the machine work smoothly. In addition, v-belt drive can also act as overload protection device. Moreover, there are two connection modes of the machine head and the cylinder body: insert connection and bolted connection. And you can choose the best connection mode according actual situation.

Biomass raw material such as wood branches, bamboo dust and crop stalks need to go through four steps to be finished charcoal products. The four processing steps are crushing process, drying process, briquetting process(Hot Sale straw briquette log machine and carbonizing process.

The solid fuel(charcoal briquette) that is made by Hot Salestraw briquette log machinein Nigeria is of high calorific value. And it is easy to light the charcoal briquettes. Compared with ordinary timber, charcoal fuel’s combustion period is longer, and much less pollutants are generated during burning. All in all, the use of charcoal sticks can partly solve the problem of energy shortage.

Biomass fuel is an important renewable energy resource. Nowadays, under the situation that fossil fuel becomes less and less, biomass energy aroused people’s wide concern. Charcoal briquettes made by Hot Sale straw briquette log machine are the most common biomass fuel whose ash content and sulphur content is relatively low. That means it will not cause many pollutants to use charcoal as fuel.

There will be some unforeseen circumstances while using the Hot Salestraw briquette log machine. For example, if material clogs in the feeding port, at this time, you can use a batten or a bamboo cane to solve the problem. Notice: you mustn’t use metal bars which will damage the machine.

It is common that pilot run should be done before the straw briquette log machine is put into use. Biomass briquette equipment is no exception. It should idle without any load for about 3 minutes at the beginning. If everything goes smoothly, you can add some material into the feeding port.