efficient straw briquetting machinery in Arabia

The efficient straw briquetting machinery are high-efficiency and energy-saving equipment. Nowadays, people are paying more and more attention to environment protection. And biomass briquetting machines can turn some plant wastes into useful charcoal, which will protect environment indirectly. Therefore, biomass briquette machines play an important role in this field.

straw briquetting machinery in Arabia takes forestry wastes and crop wastes as material to make briquettes. The forestry wastes and crop wastes include saw dust, corn stalks, beanstalks, sorghum stalks, cotton stalks, peanut vines, sunflower stalks and so on. EP briquette machines can turn biomass wastes into treasure.

efficient straw briquetting machinery have used the technique of piston stamping and spiral prepressing. That will make sure that the movement of the forming molds will not be damaged heavily. In other words, our briquetting equipment’s service life is longer.

efficient straw briquetting machinery can be customized according to your requirements. For example, we can customize different molds according to the raw materials. Apart from this point, we can also customize the machines of different production yield.

efficient straw briquetting machinery are adaptable for forming all kinds of biomass raw materials into briquettes. The material could be powdery or granular material as long as its moisture content is between 5%-12%. Besides, it is equipped with an electric heating device that can solve the problem of blocking material.

The working flow of producing charcoal briquette goes in the following order: crushing raw material, drying material, briquetting material into hollow rods, carbonizing the rods in furnaces. Throughout the whole production line , many different machines are needed. And straw briquetting machineryin Arabia and drying machines are important equipment.

Charcoal rods which are produced by efficientstraw briquetting machineryin Arabia can be used in steel mills in order to make high-quality steel. In a word, charcoal briquettes are widely used in different industries, and the market demand of it also becomes large. As a result, biomass briquette machines are widely praised.in the international market. The usage of biomass briquette machines has greatly reduced the cost of making people's charcoal sticks, while profit multiples at the same time.

Biomass fuel is an important renewable energy resource. Nowadays, under the situation that fossil fuel becomes less and less, biomass energy aroused people’s wide concern. Charcoal briquettes made by efficient straw briquetting machinery are the most common biomass fuel whose ash content and sulphur content is relatively low. That means it will not cause many pollutants to use charcoal as fuel.

The salesmen of EP Machinery are all very experienced. They can give your best advice and customize best equipment for you according to your requirements. In addition, efficient straw briquetting machinery you purchase will be checked thoroughly before delivery.

It is common that pilot run should be done before the straw briquetting machinery is put into use. Biomass briquette equipment is no exception. It should idle without any load for about 3 minutes at the beginning. If everything goes smoothly, you can add some material into the feeding port.