Automatic straw briquetting press in Indonesia

The Automatic straw briquetting press is also called charcoal stick extruding machine. It employs the working principle of screw extruding briquetting to compress the powdery biomass material into rod-shape solid fuel. This kind of briquette machines has a lot of advantages. For example, its production yield is high and it is energy-saving.

Our biomass briquetting equipment employs corn stalks, corncob, twigs, leaves and saw dust as raw materials. Firstly, you need to use an EP crusher machine to make those materials into small particles or powder. Then the crushed material will be compressed in the Automatic straw briquetting press in Indonesia.

The working principle of straw briquetting press in Indonesia is to make powdery ligneous materials into rod-shaped solid fuel under the condition of high pressure and temperature. And the inside temperature of the machine is adjustable.

It is widely acknowledged in the market that Automaticstraw briquetting press are  durable equipment. Here is the reason why our machines are long-lasting products. The main parts of the machines are made from special wear-resistant material.

Automaticstraw briquetting pressin Indonesia adopt v-belt drive which can make the machine work smoothly. In addition, v-belt drive can also act as overload protection device. Moreover, there are two connection modes of the machine head and the cylinder body: insert connection and bolted connection. And you can choose the best connection mode according actual situation.

This is the simple instruction of the working procedure of charcoal briquette making lines. First of all, the crushing machine will crush the raw material. Then, the drying machine will dry the wet material to some degree. Next, the dried material will be compressed and formed in the straw briquetting pressin Indonesia. The last step is to carbonize the formed briquettes with carbonation furnaces.

The solid fuel(charcoal briquette) that is made by Automatic straw briquetting press in Indonesia  is of high calorific value. And it is easy to light the charcoal briquettes. Compared with ordinary timber, charcoal fuel’s combustion period is longer, and much less pollutants are generated during burning. All in all, the use of charcoal sticks can partly solve the problem of energy shortage.

Biomass briquettes produced by Automatic straw briquetting press don’t contain any phosphorus. Therefore, when the briquettes are burning, no sulfur dioxide  and phosphorus pentoxide will be generated. As a result, no acid rain will be formed. We can say using biomass briquettes as fuel is a way to protect the environment.

straw briquetting pressin Indonesia can make powdery and small granular material that contain lignin into briquettes. In order to produce high-quality briquettes, you should use material that is shorter than 3mm. Generally, a crushing machine will be used before the briquette machine to make material into suitable powder.

There are something you should know about installing a straw briquetting press in Indonesia. Firstly, before installing, all the components of the machine should be cleaned. Secondly, make sure there is no broken parts in the machine. Thirdly, the machine should be fixed on the ground firmly.