New Design waste paper pressing machine with good price

The New Design waste paper pressing machine are high-efficiency and energy-saving equipment. Nowadays, people are paying more and more attention to environment protection. And biomass briquetting machines can turn some plant wastes into useful charcoal, which will protect environment indirectly. Therefore, biomass briquette machines play an important role in this field.

Wood dust, crop stalks, peanut shells, branches and rice husk are common materials for New Designwaste paper pressing machine. These materials will be made into briquettes. Next, the processed briquettes will be carbonized in a furnace. After this step, charcoal briquettes will finally be made.

The working principle of New Designwaste paper pressing machinewith good price is quite simple. The crushed materials(twigs, stalks, straws, cotton stalks...) will be added into the feeding port. There is no need to add any adhesive in the powdery materials. Under high temperature and pressure, the materials will be pressed into high-density briquettes.

The structure of New Designwaste paper pressing machine is compact. The finished briquettes can be used as fuel directly, or you can put them into a carbonation furnace for deep processing. Our machines can produce high-density briquettes which are solid fuel with high calorific value.

New Designwaste paper pressing machine are adaptable for forming all kinds of biomass raw materials into briquettes. The material could be powdery or granular material as long as its moisture content is between 5%-12%. Besides, it is equipped with an electric heating device that can solve the problem of blocking material.

Firstly, you should use a crusher machine to crush the raw material according to the requirements. Secondly, if the water content of the crushed material is higher than 12%, a drying machine need to dry it. The moisture content of the material should be among 6%-12%. Thirdly, New Designwaste paper pressing machinewith good price will form the material into hollow rods. Finally, the hollow rods will become charcoal briquettes in the carbonation furnaces.

The charcoal briquetting rods made by New Designwaste paper pressing machinewith good price are used usually for outdoor barbecue. According to the characters and features of charcoal briquettes, we can also use this fuel in metallurgical industry, chemical industry, food industry, building industry, ceramic industry and stock farming.

Biomass fuel is an important renewable energy resource. Nowadays, under the situation that fossil fuel becomes less and less, biomass energy aroused people’s wide concern. Charcoal briquettes made by New Designwaste paper pressing machine are the most common biomass fuel whose ash content and sulphur content is relatively low. That means it will not cause many pollutants to use charcoal as fuel.

The salesmen of EP Machinery are all very experienced. They can give your best advice and customize best equipment for you according to your requirements. In addition, New Designwaste paper pressing machine you purchase will be checked thoroughly before delivery.

It is common that pilot run should be done before the waste paper pressing machine is put into use. Biomass briquette equipment is no exception. It should idle without any load for about 3 minutes at the beginning. If everything goes smoothly, you can add some material into the feeding port.