Professional wood briquette extruder machine of EP Machinery

Professional wood briquette extruder machine are used to convert powdery material into rod-shaped products under high pressure and temperature. This equipment has some requirements for the raw material. Firstly, the diameter of the raw material should be shorter than 10mm. Secondly, the moisture content of the raw material should lower than 12%. After the forming process in the biomass briquetting machine, the formed hollow rods will be put into a carbonation furnace.

Many materials can be used by Professionalwood briquette extruder machineof EP Machinery. Wood shavings, bamboo shavings, branches, twigs, wood offcut and fruit shells are good materials. There is one thing that you should notice is that they are hard material. Thus, the crushing procedure is necessary before forming procedure. And you need a powerful crusher to process those hard materials.

Professionalwood briquette extruder machine can compress powdery materials which contain lignin into briquettes. The molds for making briquettes can be customized. You can use this equipment to make briquettes of three different diameters: 45mm, 50mm, 55mm.

The core part of the Professionalwood briquette extruder machine is the screw propeller, which is made of ultratek and tungsten carbide. Hence, its service life is longer. What’s more, it can operate continuously for 40 to 60 hours. If you maintain it at regular intervals, you can use it for a long time.

Professional wood briquette extruder machine of EP Machinery are highly automatic equipment. This kind of equipment has many different advantages such as large output, reasonable price,  low power consumption and easy operation. What’s more, it is convenient to move the machine from one place to another place. In addition, if there is no electric power facilities available, the briquette machines can be powered by diesel engines.

In general, to make charcoal briquettes, crushing process, drying process, briquetting process and carbonizing process will be conducted orderly. Crushing machines are used to crush some material that are large and can not be formed by the  Professional wood briquette extruder machine directly. There are different types of crusher machines of our company. You can choose the suitable one according to the raw material that you plan to use.

Charcoal briquettes are renewable fuel which is made from biomass wastes by Professionalwood briquette extruder machineof EP Machinery. The calorific value of charcoal briquette is higher than common charcoal and coal. Moreover, the briquette is smokeless and odourless when it is burning. Apart from that, there is no poison generated during its burning. It can be applied for home heating and barbecuing.

Developing biomass energy has driving effects on agricultural fields. For example, crop stalks, wood dust, bamboo dust, tree branches are valueless agricultural wastes. However, you can use Professionalwood briquette extruder machine to turn them into flammable briquettes which can be sold.

wood briquette extruder machineof EP Machinery can make powdery and small granular material that contain lignin into briquettes. In order to produce high-quality briquettes, you should use material that is shorter than 3mm. Generally, a crushing machine will be used before the briquette machine to make material into suitable powder.

It is common that pilot run should be done before the wood briquette extruder machine is put into use. Biomass briquette equipment is no exception. It should idle without any load for about 3 minutes at the beginning. If everything goes smoothly, you can add some material into the feeding port.