large-capacity wood briquette pressing machine in China

Our biomass briquetting machines are made of special wear-resistant material. Thus, compared with traditional equipment, the refined briquette machines have long service life. In addition, large-capacity wood briquette pressing machine are labor-saving equipment. In this way, the cost of investment will be less.

Many materials can be used by large-capacity wood briquette pressing machine in China. Wood shavings, bamboo shavings, branches, twigs, wood offcut and fruit shells are good materials. There is one thing that you should notice is that they are hard material. Thus, the crushing procedure is necessary before forming procedure. And you need a powerful crusher to process those hard materials.

It is easy to understand the working principle of large-capacitywood briquette pressing machinein China. Simply speaking, putting the powdery materials in the feeding port. Then the materials will be pressed and formed in the briquetting machine. After that, finished briquettes will come out from the discharging port.

It is widely acknowledged in the market that large-capacity wood briquette pressing machine are  durable equipment. Here is the reason why our machines are long-lasting products. The main parts of the machines are made from special wear-resistant material.

The effect of rigid connection on the propeller bed and the machine casing is obvious. With this design, the machine can resist reaction thrust, so large-capacitywood briquette pressing machine runs steadily  and will not make too much noise when working.

Firstly, you should use a crusher machine to crush the raw material according to the requirements. Secondly, if the water content of the crushed material is higher than 12%, a drying machine need to dry it. The moisture content of the material should be among 6%-12%. Thirdly, large-capacitywood briquette pressing machinein China will form the material into hollow rods. Finally, the hollow rods will become charcoal briquettes in the carbonation furnaces.

The usage amount of charcoal briquettes made by large-capacity wood briquette pressing machine in China  is on the rise gradually. Charcoal sticks are increasingly used in our daily life and industrial production. On the one hand, charcoal sticks can be used in our favorite barbecues. Because charcoal rods are smokeless and odourless, they have become more and more favorable; On the other hand, charcoal briquetting sticks are ideal material for warming in winter.

Biomass charcoal briquettes made by wood briquette pressing machine are clean energy. After burning, there is only little ash left. This is good for environment protection. What’s more, little ash is left means you don’t need a large place to store the ash. And the ash can be used as fertilizer.

Our factory is located in Anyang city, Henan province. If you want to buy  large-capacity wood briquette pressing machine from our company, we sincerely hope that you come and visit our factory. When you come, you can see the equipment by yourself. What’s more, we can take you to some factories that are owned by our customers who bought machines from us.

It is common that pilot run should be done before the wood briquette pressing machine is put into use. Biomass briquette equipment is no exception. It should idle without any load for about 3 minutes at the beginning. If everything goes smoothly, you can add some material into the feeding port.