Energy-saving wood log charcoal making machine with long service life

In the industry of manufacturing charcoal from biomass wastes, Energy-saving wood log charcoal making machine and carbonizing furnaces are very important equipment. In other words, they are core machines in a charcoal briquette production line. If the raw material is relatively large pieces or granules, a crushing machine should be equipped before the biomass briquetting machine. What’s more, if the raw material is too wet, you can put a drying machine after the crusher machine.

The main function of Energy-savingwood log charcoal making machinewith long service life is to make flammable briquettes from forestry wastes and crop wastes such as all kinds of stalks and wood dust through the technique of hot briquetting.

Ligneous materials have some inherent characteristics which determine that they can be made into briquettes as solid fuel. Energy-savingwood log charcoal making machinewith long service life are designed to process these ligneous materials. Under high pressure, the spiral extruding device in the machine will press the material into briquettes.

The core part of the Energy-savingwood log charcoal making machine is the screw propeller, which is made of ultratek and tungsten carbide. Hence, its service life is longer. What’s more, it can operate continuously for 40 to 60 hours. If you maintain it at regular intervals, you can use it for a long time.

Energy-savingwood log charcoal making machine employs a steep-lead feeding propeller, so the feeding speed is fast. What’s more, the extruding propeller inside the machine has a small lead, which will save energy.

A charcoal briquette production line basically consists of a crushing machine, a dryer, a Energy-savingwood log charcoal making machine and a carbonation furnace. These machines are placed in order to make high-quality charcoal briquettes. What’s more, you can also equip an packing machine behind the carbonation furnace.

Charcoal briquettes are not only high-quality fuel for domestic cookers, heating stoves and industrial boilers, but also they can be used as clean fuel for power plants. If we can make good use of charcoal briquettes with Energy-saving wood log charcoal making machine with long service life, it will make it possible to realize the sustainable development of energy. In addition, using charcoal briquette as fuel will help a lot to deal with the problems caused by environmental pollution.

Biomass charcoal briquettes made by wood log charcoal making machine are clean energy. After burning, there is only little ash left. This is good for environment protection. What’s more, little ash is left means you don’t need a large place to store the ash. And the ash can be used as fertilizer.

There is a regulation for using a Energy-saving wood log charcoal making machine. Before stopping the machine, the feeding port should be empty, which means all material in the feeding port has been processed. Besides, we suggest you install a ampere-voltage meter to avoid overload operation.

The Energy-savingwood log charcoal making machine should go through the run-test process after installing. The first step you should do is to add some lubrication oil on the joints of the machine. Then you should check all the bolts. If any bolts are loose, you should tighten them up. Next, you should make sure there is no sundry in the machine.