search

large-capacity wood sawdust making machine in Indonesia

2019-10-17 22:56:00
czqwjb009
Original
471
Summary :To some degree, large-capacity wood sawdust making machine are eco-friendly equipment, so the investment prospect of this kind of machine is promising. Currently, biomass briquetting equipment is widely used in the fields of industrial engineering, agricultural industry, stock farming, chemical industry, metallurgy, heating and so on.

large-capacity wood sawdust making machine are used to convert powdery material into rod-shaped products under high pressure and temperature. This equipment has some requirements for the raw material. Firstly, the diameter of the raw material should be shorter than 10mm. Secondly, the moisture content of the raw material should lower than 12%. After the forming process in the biomass briquetting machine, the formed hollow rods will be put into a carbonation furnace.

EP biomass briquetting machines can take many biomass wastes as material. Some of them need to be crushed into small particles before the briquetteing process. The most common materials are saw dust and rice husk. These two kinds of materials are small enough, so it is not necessary to crush them before putting them into the  large-capacity wood sawdust making machine.

The working principle of large-capacity wood sawdust making machine in Indonesia is quite simple. The crushed materials(twigs, stalks, straws, cotton stalks...) will be added into the feeding port. There is no need to add any adhesive in the powdery materials. Under high temperature and pressure, the materials will be pressed into high-density briquettes.

The core part of the large-capacity wood sawdust making machine is the screw propeller, which is made of ultratek and tungsten carbide. Hence, its service life is longer. What’s more, it can operate continuously for 40 to 60 hours. If you maintain it at regular intervals, you can use it for a long time.

The major components of a large-capacitywood sawdust making machine are high-quality. They are made from wear-resistant material. With these components, the service life of the briquetting equipment has been prolonged.

The working flow of producing charcoal briquette goes in the following order: crushing raw material, drying material, briquetting material into hollow rods, carbonizing the rods in furnaces. Throughout the whole production line , many different machines are needed. And wood sawdust making machinein Indonesia and drying machines are important equipment.

Charcoal briquettes are not only high-quality fuel for domestic cookers, heating stoves and industrial boilers, but also they can be used as clean fuel for power plants. If we can make good use of charcoal briquettes with large-capacitywood sawdust making machinein Indonesia, it will make it possible to realize the sustainable development of energy. In addition, using charcoal briquette as fuel will help a lot to deal with the problems caused by environmental pollution.

Biomass briquettes made by wood sawdust making machinein Indonesia are important renewable energy source, and it has gained more and more people’s attention. In addition, it is easy to realize large-scale production of biomass briquettes. And it is convenient to transport and store charcoal briquettes.

The main business item of our company is to produce large-capacitywood sawdust making machinein Indonesia and charcoal briquette production lines. Our briquette machines are eco-friendly equipment and this kind of briquetting machine is one of the best-selling machines on the international market.

There are something you should know about installing a wood sawdust making machinein Indonesia. Firstly, before installing, all the components of the machine should be cleaned. Secondly, make sure there is no broken parts in the machine. Thirdly, the machine should be fixed on the ground firmly.

large-capacity wood sawdust making machine in Indonesia

Write a Comment
Comment will be posted once reviewed.