environmental friendly wooden powder briquetting machine with best solutions

In the industry of manufacturing charcoal from biomass wastes, environmental friendly wooden powder briquetting machine and carbonizing furnaces are very important equipment. In other words, they are core machines in a charcoal briquette production line. If the raw material is relatively large pieces or granules, a crushing machine should be equipped before the biomass briquetting machine. What’s more, if the raw material is too wet, you can put a drying machine after the crusher machine.

environmental friendly wooden powder briquetting machine with best solutions are able to make use of many different biomass wastes. Apart from this source of raw material, you can also plant some “energy plants” that contains a lot of lignin on unfertile farmland. Then you can take these energy plants as raw material for briquetting.

Ligneous materials have some inherent characteristics which determine that they can be made into briquettes as solid fuel. environmental friendly wooden powder briquetting machine with best solutions are designed to process these ligneous materials. Under high pressure, the spiral extruding device in the machine will press the material into briquettes.

The machines’ stability and durability is pretty high. It is very important to lubricate the equipment regularly. As long as there is no lack of oil in the joints of the machine, the wooden powder briquetting machine can be used for many years.

environmental friendlywooden powder briquetting machinewith best solutions’s pinch roller has a function of automatic regulating. This function will adopt bi-rolling principle of the thrust bearings to automatically adjust pressure, so that the material in the machine will not agglomerate. All in all, the function will guarantee the forming effect.

Biomass raw material such as wood branches, bamboo dust and crop stalks need to go through four steps to be finished charcoal products. The four processing steps are crushing process, drying process, briquetting process(environmental friendlywooden powder briquetting machine and carbonizing process.

Charcoal rods which are produced by environmental friendly wooden powder briquetting machine with best solutions can be used in steel mills in order to make high-quality steel. In a word, charcoal briquettes are widely used in different industries, and the market demand of it also becomes large. As a result, biomass briquette machines are widely praised.in the international market. The usage of biomass briquette machines has greatly reduced the cost of making people's charcoal sticks, while profit multiples at the same time.

Biomass energy has good ecological and social benefits. First of all, using biomass briquettes which are made by environmental friendlywooden powder briquetting machine as fuel will protect the environment. Secondly, it will promote continuous development in agriculture.

Every time you turn on the switch of a wooden powder briquetting machine with best solutions, you should check the flexibility of machines’ rotating parts and make sure there is no abnormal noise. What’s more, before add material into the feeding port, the machine should idle for 2-3 minutes.

It is common that pilot run should be done before the wooden powder briquetting machine is put into use. Biomass briquette equipment is no exception. It should idle without any load for about 3 minutes at the beginning. If everything goes smoothly, you can add some material into the feeding port.