search

Professional biomass wood briquette machine for EU market

2019-11-18 22:11:00
czqwjb009
Original
454
Summary :The Professional biomass wood briquette machine is used in charcoal production lines. In general, the whole production line consists of a crusher machine, a drying machine, a briquette machine, a carbonation furnace and some auxiliary equipment. The finished charcoal products are of high density and good flammability.

Our biomass briquetting machines are made of special wear-resistant material. Thus, compared with traditional equipment, the refined briquette machines have long service life. In addition, Professional biomass wood briquette machine are labor-saving equipment. In this way, the cost of investment will be less.

Our biomass briquetting equipment employs corn stalks, corncob, twigs, leaves and saw dust as raw materials. Firstly, you need to use an EP crusher machine to make those materials into small particles or powder. Then the crushed material will be compressed in the Professionalbiomass wood briquette machinefor EU market.

Ligneous materials have some inherent characteristics which determine that they can be made into briquettes as solid fuel. Professional biomass wood briquette machine for EU market are designed to process these ligneous materials. Under high pressure, the spiral extruding device in the machine will press the material into briquettes.

The core part of the Professional biomass wood briquette machine is the screw propeller, which is made of ultratek and tungsten carbide. Hence, its service life is longer. What’s more, it can operate continuously for 40 to 60 hours. If you maintain it at regular intervals, you can use it for a long time.

Professional biomass wood briquette machine for EU market

The major components of a Professionalbiomass wood briquette machine are high-quality. They are made from wear-resistant material. With these components, the service life of the briquetting equipment has been prolonged.

In general, to make charcoal briquettes, crushing process, drying process, briquetting process and carbonizing process will be conducted orderly. Crushing machines are used to crush some material that are large and can not be formed by the  Professional biomass wood briquette machine directly. There are different types of crusher machines of our company. You can choose the suitable one according to the raw material that you plan to use.

The charcoal briquettes that are produced by Professional biomass wood briquette machine for EU market are black hollow rods whose density is three times higher than common charcoal. Its calorific value is about 7000 kcal per kilo. What’s more, ash carbon content of it is significantly lower than that of common charcoal, so it is often used in barbecues.

Developing biomass energy has driving effects on agricultural fields. For example, crop stalks, wood dust, bamboo dust, tree branches are valueless agricultural wastes. However, you can use Professional biomass wood briquette machine to turn them into flammable briquettes which can be sold.

Every time you turn on the switch of a biomass wood briquette machinefor EU market, you should check the flexibility of machines’ rotating parts and make sure there is no abnormal noise. What’s more, before add material into the feeding port, the machine should idle for 2-3 minutes.

The Professional biomass wood briquette machine should go through the run-test process after installing. The first step you should do is to add some lubrication oil on the joints of the machine. Then you should check all the bolts. If any bolts are loose, you should tighten them up. Next, you should make sure there is no sundry in the machine.

Write a Comment
Comment will be posted once reviewed.