reliable quality charcoal briquette press from experienced factory

reliable quality charcoal briquette press are used to convert powdery material into rod-shaped products under high pressure and temperature. This equipment has some requirements for the raw material. Firstly, the diameter of the raw material should be shorter than 10mm. Secondly, the moisture content of the raw material should lower than 12%. After the forming process in the biomass briquetting machine, the formed hollow rods will be put into a carbonation furnace.

reliable qualitycharcoal briquette press of EP Machinery company are high-efficiency and high-quality equipment. Our briquetting equipment can process materials including rice hull, hay, shrubs branches, wood refuse, bamboo refuse and bamboo dust, sugarcane bagasse and so on.

It is easy to understand the working principle of reliable qualitycharcoal briquette pressfrom experienced factory. Simply speaking, putting the powdery materials in the feeding port. Then the materials will be pressed and formed in the briquetting machine. After that, finished briquettes will come out from the discharging port.

The machines’ stability and durability is pretty high. It is very important to lubricate the equipment regularly. As long as there is no lack of oil in the joints of the machine, the charcoal briquette press can be used for many years.

reliable quality charcoal briquette press from experienced factory adopt v-belt drive which can make the machine work smoothly. In addition, v-belt drive can also act as overload protection device. Moreover, there are two connection modes of the machine head and the cylinder body: insert connection and bolted connection. And you can choose the best connection mode according actual situation.

This is the simple instruction of the working procedure of charcoal briquette making lines. First of all, the crushing machine will crush the raw material. Then, the drying machine will dry the wet material to some degree. Next, the dried material will be compressed and formed in the charcoal briquette press from experienced factory. The last step is to carbonize the formed briquettes with carbonation furnaces.

The charcoal briquettes that are produced by reliable quality charcoal briquette press from experienced factory are black hollow rods whose density is three times higher than common charcoal. Its calorific value is about 7000 kcal per kilo. What’s more, ash carbon content of it is significantly lower than that of common charcoal, so it is often used in barbecues.

Biomass energy has good ecological and social benefits. First of all, using biomass briquettes which are made by reliable quality charcoal briquette press as fuel will protect the environment. Secondly, it will promote continuous development in agriculture.

The electric controller of the reliable qualitycharcoal briquette pressfrom experienced factory adopts high-quality electrical apparatus elements. The overload protector and the leakage protector will protect the machine and the the operator. In addition, to maintain the equipment, you should inject lubrication oil on the rolling bearing regularly.

It is common that pilot run should be done before the charcoal briquette press is put into use. Biomass briquette equipment is no exception. It should idle without any load for about 3 minutes at the beginning. If everything goes smoothly, you can add some material into the feeding port.