search

Henan charcoal briquettes making machine in Turkey

2019-10-27 22:56:00
czqwjb009
Original
480
Summary :Henan charcoal briquettes making machine are used to convert powdery material into rod-shaped products under high pressure and temperature. This equipment has some requirements for the raw material. Firstly, the diameter of the raw material should be shorter than 10mm. Secondly, the moisture content of the raw material should lower than 12%. After the forming process in the biomass briquetting machine, the formed hollow rods will be put into a carbonation furnace.

The Henan charcoal briquettes making machine is used in charcoal production lines. In general, the whole production line consists of a crusher machine, a drying machine, a briquette machine, a carbonation furnace and some auxiliary equipment. The finished charcoal products are of high density and good flammability.

EP biomass briquetting machines can take many biomass wastes as material. Some of them need to be crushed into small particles before the briquetteing process. The most common materials are saw dust and rice husk. These two kinds of materials are small enough, so it is not necessary to crush them before putting them into the  Henan charcoal briquettes making machine.

Henan charcoal briquettes making machine in Turkey

The working principle of charcoal briquettes making machinein Turkey is to make powdery ligneous materials into rod-shaped solid fuel under the condition of high pressure and temperature. And the inside temperature of the machine is adjustable.

The core part of the Henancharcoal briquettes making machine is the screw propeller, which is made of ultratek and tungsten carbide. Hence, its service life is longer. What’s more, it can operate continuously for 40 to 60 hours. If you maintain it at regular intervals, you can use it for a long time.

The effect of rigid connection on the propeller bed and the machine casing is obvious. With this design, the machine can resist reaction thrust, so Henan charcoal briquettes making machine  runs steadily  and will not make too much noise when working.

The working flow of producing charcoal briquette goes in the following order: crushing raw material, drying material, briquetting material into hollow rods, carbonizing the rods in furnaces. Throughout the whole production line , many different machines are needed. And charcoal briquettes making machine in Turkey and drying machines are important equipment.

The charcoal sticks made by Henan charcoal briquettes making machine in Turkey are widely used. For instance, charcoal briquettes can be used for heating in winter in the northern area. What’s more, you can use them to warm greenhouses when it is cold. In addition, you can also use those briquettes as fuel to cook.

Biomass energy has good ecological and social benefits. First of all, using biomass briquettes which are made by Henan charcoal briquettes making machine as fuel will protect the environment. Secondly, it will promote continuous development in agriculture.

The salesmen of EP Machinery are all very experienced. They can give your best advice and customize best equipment for you according to your requirements. In addition, Henan charcoal briquettes making machine you purchase will be checked thoroughly before delivery.

There are something you should know about installing a charcoal briquettes making machinein Turkey. Firstly, before installing, all the components of the machine should be cleaned. Secondly, make sure there is no broken parts in the machine. Thirdly, the machine should be fixed on the ground firmly.

Write a Comment
Comment will be posted once reviewed.