durable piston press briquetting machine from China

The durable piston press briquetting machine can turn forest wastes and crop wastes which contain wood fiber into flammable briquettes through the technique of hot compression molding. Compared with the similar machines of other manufacturers, the biomass briquette machines of our factory are more advanced.

Biomass briquette machines are suitable to process a lot of different raw materials. It is not true that briquette machines can deal with all kinds of materials. If you want to use durable piston press briquetting machine from China to make charcoal sticks, you should make sure that the moisture content of the raw material is among 5%-12%. If it is too wet, then you can dry it with a drying machine. In addition, the more lignin the raw material contains, the higher the carbon content of the finished charcoal sticks will be.

durable piston press briquetting machine from China employ the working principle of extruding materials under high pressure and high temperature. The components of EP biomass briquetting equipment are made of high-quality material.

It is widely acknowledged in the market that durable piston press briquetting machine are  durable equipment. Here is the reason why our machines are long-lasting products. The main parts of the machines are made from special wear-resistant material.

durable piston press briquetting machine are adaptable for forming all kinds of biomass raw materials into briquettes. The material could be powdery or granular material as long as its moisture content is between 5%-12%. Besides, it is equipped with an electric heating device that can solve the problem of blocking material.

At the beginning, the raw materials will be crushed into small pieces. If the moisture content of the raw materials is high, then they need to be dried. After the drying process, it comes to the core procedure of the production line: briquetting. After the raw materials are made into briquettes by durable piston press briquetting machine from China, you can choose to put them into a carbonation furnace to make charcoal briquettes or pack them directly. In general, many people choose to conduct the carbonizing process because charcoal briquettes value more than “raw briquettes” that don’t go through the carbonizing process.

The usage amount of charcoal briquettes made by durablepiston press briquetting machinefrom China is on the rise gradually. Charcoal sticks are increasingly used in our daily life and industrial production. On the one hand, charcoal sticks can be used in our favorite barbecues. Because charcoal rods are smokeless and odourless, they have become more and more favorable; On the other hand, charcoal briquetting sticks are ideal material for warming in winter.

Biomass briquettes produced by durable piston press briquetting machine don’t contain any phosphorus. Therefore, when the briquettes are burning, no sulfur dioxide  and phosphorus pentoxide will be generated. As a result, no acid rain will be formed. We can say using biomass briquettes as fuel is a way to protect the environment.

There is a regulation for using a durable piston press briquetting machine. Before stopping the machine, the feeding port should be empty, which means all material in the feeding port has been processed. Besides, we suggest you install a ampere-voltage meter to avoid overload operation.

It is common that pilot run should be done before the piston press briquetting machine is put into use. Biomass briquette equipment is no exception. It should idle without any load for about 3 minutes at the beginning. If everything goes smoothly, you can add some material into the feeding port.