Cheap rice husk briquette machine in South Africa

Cheap rice husk briquette machine are used to convert powdery material into rod-shaped products under high pressure and temperature. This equipment has some requirements for the raw material. Firstly, the diameter of the raw material should be shorter than 10mm. Secondly, the moisture content of the raw material should lower than 12%. After the forming process in the biomass briquetting machine, the formed hollow rods will be put into a carbonation furnace.

Biomass briquette machines are suitable to process a lot of different raw materials. It is not true that briquette machines can deal with all kinds of materials. If you want to use Cheap rice husk briquette machine in South Africa to make charcoal sticks, you should make sure that the moisture content of the raw material is among 5%-12%. If it is too wet, then you can dry it with a drying machine. In addition, the more lignin the raw material contains, the higher the carbon content of the finished charcoal sticks will be.

Ligneous materials have some inherent characteristics which determine that they can be made into briquettes as solid fuel. Cheaprice husk briquette machinein South Africa are designed to process these ligneous materials. Under high pressure, the spiral extruding device in the machine will press the material into briquettes.

Cheap rice husk briquette machine can be customized according to your requirements. For example, we can customize different molds according to the raw materials. Apart from this point, we can also customize the machines of different production yield.

Cheaprice husk briquette machinein South Africa are highly automatic equipment. This kind of equipment has many different advantages such as large output, reasonable price,  low power consumption and easy operation. What’s more, it is convenient to move the machine from one place to another place. In addition, if there is no electric power facilities available, the briquette machines can be powered by diesel engines.

Biomass raw material such as wood branches, bamboo dust and crop stalks need to go through four steps to be finished charcoal products. The four processing steps are crushing process, drying process, briquetting process(Cheaprice husk briquette machine and carbonizing process.

In industrial engineering, charcoal briquettes that are made by Cheap rice husk briquette machine in South Africa can take place of coal and heavy oil to be fuel for heating steam boilers. In addition, the charcoal briquette can also be used as material to make activated carbon, silicon carbide and so on. Therefore, charcoal briquettes are necessary material in mosquito-repellent incense plants, explosive factories and casting factories.

Biomass fuel’s development can restrain the price of crude oil in the international market. Biomass charcoal briquettes made by rice husk briquette machine in South Africa can take place of the traditional fossil energy such as coal and oil. Thus, the country’s import volume of oil will decrease. And the amount of carbon dioxide emitted in air by human activity will be reduced.

rice husk briquette machinein South Africa can make powdery and small granular material that contain lignin into briquettes. In order to produce high-quality briquettes, you should use material that is shorter than 3mm. Generally, a crushing machine will be used before the briquette machine to make material into suitable powder.

It is common that pilot run should be done before the rice husk briquette machine is put into use. Biomass briquette equipment is no exception. It should idle without any load for about 3 minutes at the beginning. If everything goes smoothly, you can add some material into the feeding port.