Inexpensive sawdust brick press for waste recycling

The Inexpensive sawdust brick press is also called charcoal stick extruding machine. It employs the working principle of screw extruding briquetting to compress the powdery biomass material into rod-shape solid fuel. This kind of briquette machines has a lot of advantages. For example, its production yield is high and it is energy-saving.

Biomass briquette machines are suitable to process a lot of different raw materials. It is not true that briquette machines can deal with all kinds of materials. If you want to use Inexpensive sawdust brick press for waste recycling to make charcoal sticks, you should make sure that the moisture content of the raw material is among 5%-12%. If it is too wet, then you can dry it with a drying machine. In addition, the more lignin the raw material contains, the higher the carbon content of the finished charcoal sticks will be.

The structure of Inexpensivesawdust brick press is simple. This equipment consists of five parts: frame part, driving part, feeding port, pressing part and conveying part. Our briquette machines are easy to be operated and maintained.

It is widely acknowledged in the market that Inexpensive sawdust brick press are  durable equipment. Here is the reason why our machines are long-lasting products. The main parts of the machines are made from special wear-resistant material.

Inexpensive sawdust brick press employs a steep-lead feeding propeller, so the feeding speed is fast. What’s more, the extruding propeller inside the machine has a small lead, which will save energy.

Biomass raw material such as wood branches, bamboo dust and crop stalks need to go through four steps to be finished charcoal products. The four processing steps are crushing process, drying process, briquetting process(Inexpensive sawdust brick press and carbonizing process.

The charcoal briquettes that are produced by Inexpensive sawdust brick press for waste recycling are black hollow rods whose density is three times higher than common charcoal. Its calorific value is about 7000 kcal per kilo. What’s more, ash carbon content of it is significantly lower than that of common charcoal, so it is often used in barbecues.

Biomass charcoal briquettes made by sawdust brick press are clean energy. After burning, there is only little ash left. This is good for environment protection. What’s more, little ash is left means you don’t need a large place to store the ash. And the ash can be used as fertilizer.

The electric controller of the Inexpensivesawdust brick pressfor waste recycling adopts high-quality electrical apparatus elements. The overload protector and the leakage protector will protect the machine and the the operator. In addition, to maintain the equipment, you should inject lubrication oil on the rolling bearing regularly.

It is common that pilot run should be done before the sawdust brick press is put into use. Biomass briquette equipment is no exception. It should idle without any load for about 3 minutes at the beginning. If everything goes smoothly, you can add some material into the feeding port.