Hot Sale sawdust bricks machine Manufacurer - All Article - Zhengzhou E.P Machinery Co., Ltd. - Biomass Briquette Machine,Wood Pellet Machine

Summary ：In the industry of manufacturing charcoal from biomass wastes, Hot Sale sawdust bricks machine and carbonizing furnaces are very important equipment. In other words, they are core machines in a charcoal briquette production line. If the raw material is relatively large pieces or granules, a crushing machine should be equipped before the biomass briquetting machine. What’s more, if the raw material is too wet, you can put a drying machine after the crusher machine.

Our biomass briquetting machines are made of special wear-resistant material. Thus, compared with traditional equipment, the refined briquette machines have long service life. In addition, Hot Sale sawdust bricks machine are labor-saving equipment. In this way, the cost of investment will be less.

Our biomass briquetting equipment employs corn stalks, corncob, twigs, leaves and saw dust as raw materials. Firstly, you need to use an EP crusher machine to make those materials into small particles or powder. Then the crushed material will be compressed in the Hot Sale sawdust bricks machine Manufacurer.

Hot Sale sawdust bricks machine Manufacurer

Hot Salesawdust bricks machineManufacurer employ the working principle of extruding materials under high pressure and high temperature. The components of EP biomass briquetting equipment are made of high-quality material.

The core part of the Hot Sale sawdust bricks machine is the screw propeller, which is made of ultratek and tungsten carbide. Hence, its service life is longer. What’s more, it can operate continuously for 40 to 60 hours. If you maintain it at regular intervals, you can use it for a long time.

Hot Sale sawdust bricks machine employs a steep-lead feeding propeller, so the feeding speed is fast. What’s more, the extruding propeller inside the machine has a small lead, which will save energy.

Firstly, you should use a crusher machine to crush the raw material according to the requirements. Secondly, if the water content of the crushed material is higher than 12%, a drying machine need to dry it. The moisture content of the material should be among 6%-12%. Thirdly, Hot Salesawdust bricks machineManufacurer will form the material into hollow rods. Finally, the hollow rods will become charcoal briquettes in the carbonation furnaces.

Charcoal rods which are produced by Hot Salesawdust bricks machineManufacurer can be used in steel mills in order to make high-quality steel. In a word, charcoal briquettes are widely used in different industries, and the market demand of it also becomes large. As a result, biomass briquette machines are widely praised.in the international market. The usage of biomass briquette machines has greatly reduced the cost of making people's charcoal sticks, while profit multiples at the same time.

Biomass fuel is an important renewable energy resource. Nowadays, under the situation that fossil fuel becomes less and less, biomass energy aroused people’s wide concern. Charcoal briquettes made by Hot Sale sawdust bricks machine are the most common biomass fuel whose ash content and sulphur content is relatively low. That means it will not cause many pollutants to use charcoal as fuel.

EP Machinery Company has 9 years’ experience in manufacturing sawdust bricks machine. Over the past years, we have helped many customers start their business in this industry. Importantly, we can provide you with high-quality machines and first-class service.

The Hot Salesawdust bricks machine should go through the run-test process after installing. The first step you should do is to add some lubrication oil on the joints of the machine. Then you should check all the bolts. If any bolts are loose, you should tighten them up. Next, you should make sure there is no sundry in the machine.