Professional sawdust briquetting press machine of Anyang

Our Professional sawdust briquetting press machine are high-quality equipment. You can use this machine to make charcoal rods that are hollow. Generally, the diameter of the rods are about 50-60 mm long, and the diameter of the hollow part is about 15-20mm. What’s more, the briquetting machines can produce cuboid-shaped and six-sided cylindrical hollow briquettes. If you want to make charcoal products of other shapes, we can customize molds for you.

EP biomass briquetting machines can take many biomass wastes as material. Some of them need to be crushed into small particles before the briquetteing process. The most common materials are saw dust and rice husk. These two kinds of materials are small enough, so it is not necessary to crush them before putting them into the Professionalsawdust briquetting press machine.

Professionalsawdust briquetting press machine have used the technique of piston stamping and spiral prepressing. That will make sure that the movement of the forming molds will not be damaged heavily. In other words, our briquetting equipment’s service life is longer.

Each Professionalsawdust briquetting press machineof Anyang is equipped with an automatic electric heating appliance. To some extent, this heating appliance can adjust moisture content of the material. As a result, the forming effect of the machine is guaranteed and working efficiency of the machine has been improved.

Professionalsawdust briquetting press machine are adaptable for forming all kinds of biomass raw materials into briquettes. The material could be powdery or granular material as long as its moisture content is between 5%-12%. Besides, it is equipped with an electric heating device that can solve the problem of blocking material.

Firstly, you should use a crusher machine to crush the raw material according to the requirements. Secondly, if the water content of the crushed material is higher than 12%, a drying machine need to dry it. The moisture content of the material should be among 6%-12%. Thirdly, Professionalsawdust briquetting press machineof Anyang will form the material into hollow rods. Finally, the hollow rods will become charcoal briquettes in the carbonation furnaces.

In industrial engineering, charcoal briquettes that are made by Professionalsawdust briquetting press machineof Anyang can take place of coal and heavy oil to be fuel for heating steam boilers. In addition, the charcoal briquette can also be used as material to make activated carbon, silicon carbide and so on. Therefore, charcoal briquettes are necessary material in mosquito-repellent incense plants, explosive factories and casting factories.

Biomass briquettes produced by Professional sawdust briquetting press machine don’t contain any phosphorus. Therefore, when the briquettes are burning, no sulfur dioxide  and phosphorus pentoxide will be generated. As a result, no acid rain will be formed. We can say using biomass briquettes as fuel is a way to protect the environment.

The electric controller of the Professional sawdust briquetting press machine of Anyang adopts high-quality electrical apparatus elements. The overload protector and the leakage protector will protect the machine and the the operator. In addition, to maintain the equipment, you should inject lubrication oil on the rolling bearing regularly.

There are something you should know about installing a sawdust briquetting press machineof Anyang. Firstly, before installing, all the components of the machine should be cleaned. Secondly, make sure there is no broken parts in the machine. Thirdly, the machine should be fixed on the ground firmly.