large-capacity sawdust briquetting press machine in Indonesia

large-capacity sawdust briquetting press machine are used to convert powdery material into rod-shaped products under high pressure and temperature. This equipment has some requirements for the raw material. Firstly, the diameter of the raw material should be shorter than 10mm. Secondly, the moisture content of the raw material should lower than 12%. After the forming process in the biomass briquetting machine, the formed hollow rods will be put into a carbonation furnace.

The main function of large-capacitysawdust briquetting press machinein Indonesia is to make flammable briquettes from forestry wastes and crop wastes such as all kinds of stalks and wood dust through the technique of hot briquetting.

large-capacitysawdust briquetting press machine have used the technique of piston stamping and spiral prepressing. That will make sure that the movement of the forming molds will not be damaged heavily. In other words, our briquetting equipment’s service life is longer.

The machines’ stability and durability is pretty high. It is very important to lubricate the equipment regularly. As long as there is no lack of oil in the joints of the machine, the sawdust briquetting press machine can be used for many years.

The briquetting speed of large-capacity sawdust briquetting press machine is fast. It can make briquette of 180 centimeters per minute. The service life of the equipment is 10 times longer than common machines in the market.

Firstly, you should use a crusher machine to crush the raw material according to the requirements. Secondly, if the water content of the crushed material is higher than 12%, a drying machine need to dry it. The moisture content of the material should be among 6%-12%. Thirdly, large-capacity sawdust briquetting press machine in Indonesia will form the material into hollow rods. Finally, the hollow rods will become charcoal briquettes in the carbonation furnaces.

Charcoal briquettes are not only high-quality fuel for domestic cookers, heating stoves and industrial boilers, but also they can be used as clean fuel for power plants. If we can make good use of charcoal briquettes with large-capacity sawdust briquetting press machine in Indonesia, it will make it possible to realize the sustainable development of energy. In addition, using charcoal briquette as fuel will help a lot to deal with the problems caused by environmental pollution.

Biomass briquettes made by sawdust briquetting press machinein Indonesia are important renewable energy source, and it has gained more and more people’s attention. In addition, it is easy to realize large-scale production of biomass briquettes. And it is convenient to transport and store charcoal briquettes.

We have a lot of experience in doing business with foreigners who come from all over the world. Our company’s aim is to supply high-class sawdust briquetting press machine in Indonesia and production lines to our clients. We are looking forward to establishing partnership with you.

The large-capacitysawdust briquetting press machine should go through the run-test process after installing. The first step you should do is to add some lubrication oil on the joints of the machine. Then you should check all the bolts. If any bolts are loose, you should tighten them up. Next, you should make sure there is no sundry in the machine.