Henan straw wood press briquette machine Supplier

The Henan straw wood press briquette machine is well designed. The structure of a briquette machine is simple and reasonable. And it is easy to operate the briquette machine. What’s more, the rate of finished products of our briquette machines is pretty high. That means our machines are high-efficiency equipment.

Our biomass briquetting equipment employs corn stalks, corncob, twigs, leaves and saw dust as raw materials. Firstly, you need to use an EP crusher machine to make those materials into small particles or powder. Then the crushed material will be compressed in the Henanstraw wood press briquette machineSupplier.

Henanstraw wood press briquette machineSupplier employ the working principle of extruding materials under high pressure and high temperature. The components of EP biomass briquetting equipment are made of high-quality material.

Henanstraw wood press briquette machineSupplier can be used to press many different kinds of crushed biomass materials. And you can use them in continuous production lines. Besides, it consumes less energy, and it can work efficiently.

Henanstraw wood press briquette machine are adaptable for forming all kinds of biomass raw materials into briquettes. The material could be powdery or granular material as long as its moisture content is between 5%-12%. Besides, it is equipped with an electric heating device that can solve the problem of blocking material.

Firstly, you should use a crusher machine to crush the raw material according to the requirements. Secondly, if the water content of the crushed material is higher than 12%, a drying machine need to dry it. The moisture content of the material should be among 6%-12%. Thirdly, Henanstraw wood press briquette machineSupplier will form the material into hollow rods. Finally, the hollow rods will become charcoal briquettes in the carbonation furnaces.

People often use charcoal rods for heating, barbecuing and making hot pot. In the contemporary world, this kind of flammable fuel made by Henan straw wood press briquette machine Supplier is becoming more and more popular with us. Here are some advantages of it. 1.It is smokeless when burning; 2. its calorific value is high; 3. the burning time of it is quite long.

Biomass charcoal briquettes are products that are made of agricultural and forestry organic wastes. It is the kind of recycling energy and it is eco-friendly to use biomass briquettes made by Henanstraw wood press briquette machineSupplier as fuel.

straw wood press briquette machine Supplier can make powdery and small granular material that contain lignin into briquettes. In order to produce high-quality briquettes, you should use material that is shorter than 3mm. Generally, a crushing machine will be used before the briquette machine to make material into suitable powder.

The Henanstraw wood press briquette machine should go through the run-test process after installing. The first step you should do is to add some lubrication oil on the joints of the machine. Then you should check all the bolts. If any bolts are loose, you should tighten them up. Next, you should make sure there is no sundry in the machine.