Hot Selling wood briquette extruding machine of charcoal production lines

To some degree, Hot Selling wood briquette extruding machine are eco-friendly equipment, so the investment prospect of this kind of machine is promising. Currently, biomass briquetting equipment is widely used in the fields of industrial engineering, agricultural industry, stock farming, chemical industry, metallurgy, heating and so on.

Wood dust, crop stalks, peanut shells, branches and rice husk are common materials for Hot Selling wood briquette extruding machine. These materials will be made into briquettes. Next, the processed briquettes will be carbonized in a furnace. After this step, charcoal briquettes will finally be made.

The working principle of Hot Selling wood briquette extruding machine of charcoal production lines is quite simple. The crushed materials(twigs, stalks, straws, cotton stalks...) will be added into the feeding port. There is no need to add any adhesive in the powdery materials. Under high temperature and pressure, the materials will be pressed into high-density briquettes.

Each Hot Selling wood briquette extruding machine of charcoal production lines is equipped with an automatic electric heating appliance. To some extent, this heating appliance can adjust moisture content of the material. As a result, the forming effect of the machine is guaranteed and working efficiency of the machine has been improved.

Hot Sellingwood briquette extruding machine are adaptable for forming all kinds of biomass raw materials into briquettes. The material could be powdery or granular material as long as its moisture content is between 5%-12%. Besides, it is equipped with an electric heating device that can solve the problem of blocking material.

At the beginning, the raw materials will be crushed into small pieces. If the moisture content of the raw materials is high, then they need to be dried. After the drying process, it comes to the core procedure of the production line: briquetting. After the raw materials are made into briquettes by Hot Sellingwood briquette extruding machineof charcoal production lines, you can choose to put them into a carbonation furnace to make charcoal briquettes or pack them directly. In general, many people choose to conduct the carbonizing process because charcoal briquettes value more than “raw briquettes” that don’t go through the carbonizing process.

The charcoal sticks made by Hot Sellingwood briquette extruding machineof charcoal production lines are widely used. For instance, charcoal briquettes can be used for heating in winter in the northern area. What’s more, you can use them to warm greenhouses when it is cold. In addition, you can also use those briquettes as fuel to cook.

Biomass briquettes made by wood briquette extruding machine of charcoal production lines are important renewable energy source, and it has gained more and more people’s attention. In addition, it is easy to realize large-scale production of biomass briquettes. And it is convenient to transport and store charcoal briquettes.

Every time you turn on the switch of a wood briquette extruding machine of charcoal production lines, you should check the flexibility of machines’ rotating parts and make sure there is no abnormal noise. What’s more, before add material into the feeding port, the machine should idle for 2-3 minutes.

The Hot Sellingwood briquette extruding machine should go through the run-test process after installing. The first step you should do is to add some lubrication oil on the joints of the machine. Then you should check all the bolts. If any bolts are loose, you should tighten them up. Next, you should make sure there is no sundry in the machine.