The reliable quality wood sawdust briquette extruder machine is well designed. The structure of a briquette machine is simple and reasonable. And it is easy to operate the briquette machine. What’s more, the rate of finished products of our briquette machines is pretty high. That means our machines are high-efficiency equipment.
Biomass briquette machines are suitable to process a lot of different raw materials. It is not true that briquette machines can deal with all kinds of materials. If you want to use reliable qualitywood sawdust briquette extruder machinefrom EP company to make charcoal sticks, you should make sure that the moisture content of the raw material is among 5%-12%. If it is too wet, then you can dry it with a drying machine. In addition, the more lignin the raw material contains, the higher the carbon content of the finished charcoal sticks will be.
reliable qualitywood sawdust briquette extruder machinefrom EP company employ the working principle of extruding materials under high pressure and high temperature. The components of EP biomass briquetting equipment are made of high-quality material.
It is widely acknowledged in the market that reliable qualitywood sawdust briquette extruder machine are durable equipment. Here is the reason why our machines are long-lasting products. The main parts of the machines are made from special wear-resistant material.
reliable qualitywood sawdust briquette extruder machinefrom EP company adopt v-belt drive which can make the machine work smoothly. In addition, v-belt drive can also act as overload protection device. Moreover, there are two connection modes of the machine head and the cylinder body: insert connection and bolted connection. And you can choose the best connection mode according actual situation.
Biomass raw material such as wood branches, bamboo dust and crop stalks need to go through four steps to be finished charcoal products. The four processing steps are crushing process, drying process, briquetting process(reliable quality wood sawdust briquette extruder machine and carbonizing process.
The solid fuel(charcoal briquette) that is made by reliable qualitywood sawdust briquette extruder machinefrom EP company is of high calorific value. And it is easy to light the charcoal briquettes. Compared with ordinary timber, charcoal fuel’s combustion period is longer, and much less pollutants are generated during burning. All in all, the use of charcoal sticks can partly solve the problem of energy shortage.
Developing biomass energy has driving effects on agricultural fields. For example, crop stalks, wood dust, bamboo dust, tree branches are valueless agricultural wastes. However, you can use reliable quality wood sawdust briquette extruder machine to turn them into flammable briquettes which can be sold.
There is a regulation for using a reliable qualitywood sawdust briquette extruder machine. Before stopping the machine, the feeding port should be empty, which means all material in the feeding port has been processed. Besides, we suggest you install a ampere-voltage meter to avoid overload operation.
It is common that pilot run should be done before the wood sawdust briquette extruder machine is put into use. Biomass briquette equipment is no exception. It should idle without any load for about 3 minutes at the beginning. If everything goes smoothly, you can add some material into the feeding port.