search

Operations and troubleshooting of feed mixer

2020-09-28 16:30:00
czqwjb009
Original
692
Summary :Malfunction and troubleshooting of feed mixer: 1. The machine body shakes too much during operation.2. Metal friction sound in the box.3. The unloading door is not closed tightly: remove foreign objects
Operation steps
1. Additives like microelement and vitamins should be added in the initial phase, otherwise it will cause uneven mixing due to the small amount adding.
2. Feeding sequence: big sized feed pellets should be added first, and the small sized feed pellets should be added later; feed with great quantity should be added first, and the feed with small quantity should be added later; the feed with high density should be added first, and the feed with low density should be added later.
3. Do not start the fish feed pellet machine after filling up the feed material. You should start the fish feed pellet machine before feeding to prevent the full-load starting.
4. Do not convey the mixed material by pneumatic ways. It is suggested to use belt conveyors or bucket elevators to prevent re-separation of the mixed feed during the conveying process and reduce the uniformity of mixing.

Malfunction and troubleshooting of feed mixer
1. The machine body shakes too much during operation.
①Unstable installation: need to be reinstalled.
②Bearing wear: replace the bearing.
2. Metal friction sound in the box.
①Iron materials enter into the machine: shut down the machine and remove them.
③The vertical screw of the feed crushing mixer (or the outer ring of the horizontal feed mixer) is damaged: repair or replace the damaged part.
3. The unloading door is not closed tightly: remove foreign objects
Write a Comment
Comment will be posted once reviewed.