Inexpensive rice husk wood briquette making machine with best solutions

Inexpensive rice husk wood briquette making machine are used to convert powdery material into rod-shaped products under high pressure and temperature. This equipment has some requirements for the raw material. Firstly, the diameter of the raw material should be shorter than 10mm. Secondly, the moisture content of the raw material should lower than 12%. After the forming process in the biomass briquetting machine, the formed hollow rods will be put into a carbonation furnace.

Many materials can be used by Inexpensive rice husk wood briquette making machine with best solutions. Wood shavings, bamboo shavings, branches, twigs, wood offcut and fruit shells are good materials. There is one thing that you should notice is that they are hard material. Thus, the crushing procedure is necessary before forming procedure. And you need a powerful crusher to process those hard materials.

The rice husk wood briquette making machinewith best solutions can make briquettes from materials like shaving board, sawdust board and crop wastes which need to be crushed firstly. The most important part of the equipment is the spiral extruding axle which is the forming part of the briquetteing machine.

Each Inexpensiverice husk wood briquette making machinewith best solutions is equipped with an automatic electric heating appliance. To some extent, this heating appliance can adjust moisture content of the material. As a result, the forming effect of the machine is guaranteed and working efficiency of the machine has been improved.

Inexpensive rice husk wood briquette making machine are adaptable for forming all kinds of biomass raw materials into briquettes. The material could be powdery or granular material as long as its moisture content is between 5%-12%. Besides, it is equipped with an electric heating device that can solve the problem of blocking material.

Firstly, you should use a crusher machine to crush the raw material according to the requirements. Secondly, if the water content of the crushed material is higher than 12%, a drying machine need to dry it. The moisture content of the material should be among 6%-12%. Thirdly, Inexpensive rice husk wood briquette making machine with best solutions will form the material into hollow rods. Finally, the hollow rods will become charcoal briquettes in the carbonation furnaces.

Charcoal briquettes are renewable fuel which is made from biomass wastes by Inexpensive rice husk wood briquette making machine with best solutions. The calorific value of charcoal briquette is higher than common charcoal and coal. Moreover, the briquette is smokeless and odourless when it is burning. Apart from that, there is no poison generated during its burning. It can be applied for home heating and barbecuing.

Biomass charcoal briquettes are products that are made of agricultural and forestry organic wastes. It is the kind of recycling energy and it is eco-friendly to use biomass briquettes made by Inexpensiverice husk wood briquette making machinewith best solutions as fuel.

rice husk wood briquette making machinewith best solutions can make powdery and small granular material that contain lignin into briquettes. In order to produce high-quality briquettes, you should use material that is shorter than 3mm. Generally, a crushing machine will be used before the briquette machine to make material into suitable powder.

The Inexpensive rice husk wood briquette making machine should go through the run-test process after installing. The first step you should do is to add some lubrication oil on the joints of the machine. Then you should check all the bolts. If any bolts are loose, you should tighten them up. Next, you should make sure there is no sundry in the machine.