Customizable wood log charcoal making machine in Southeast Asia

To some degree, Customizable wood log charcoal making machine are eco-friendly equipment, so the investment prospect of this kind of machine is promising. Currently, biomass briquetting equipment is widely used in the fields of industrial engineering, agricultural industry, stock farming, chemical industry, metallurgy, heating and so on.

Biomass briquette machines are suitable to process a lot of different raw materials. It is not true that briquette machines can deal with all kinds of materials. If you want to use Customizablewood log charcoal making machinein Southeast Asia to make charcoal sticks, you should make sure that the moisture content of the raw material is among 5%-12%. If it is too wet, then you can dry it with a drying machine. In addition, the more lignin the raw material contains, the higher the carbon content of the finished charcoal sticks will be.

The working principle of wood log charcoal making machine in Southeast Asia is to make powdery ligneous materials into rod-shaped solid fuel under the condition of high pressure and temperature. And the inside temperature of the machine is adjustable.

It is widely acknowledged in the market that Customizable wood log charcoal making machine are  durable equipment. Here is the reason why our machines are long-lasting products. The main parts of the machines are made from special wear-resistant material.

Customizable wood log charcoal making machine in Southeast Asia adopt v-belt drive which can make the machine work smoothly. In addition, v-belt drive can also act as overload protection device. Moreover, there are two connection modes of the machine head and the cylinder body: insert connection and bolted connection. And you can choose the best connection mode according actual situation.

At the beginning, the raw materials will be crushed into small pieces. If the moisture content of the raw materials is high, then they need to be dried. After the drying process, it comes to the core procedure of the production line: briquetting. After the raw materials are made into briquettes by Customizablewood log charcoal making machinein Southeast Asia, you can choose to put them into a carbonation furnace to make charcoal briquettes or pack them directly. In general, many people choose to conduct the carbonizing process because charcoal briquettes value more than “raw briquettes” that don’t go through the carbonizing process.

The usage amount of charcoal briquettes made by Customizable wood log charcoal making machine in Southeast Asia  is on the rise gradually. Charcoal sticks are increasingly used in our daily life and industrial production. On the one hand, charcoal sticks can be used in our favorite barbecues. Because charcoal rods are smokeless and odourless, they have become more and more favorable; On the other hand, charcoal briquetting sticks are ideal material for warming in winter.

Developing biomass energy has driving effects on agricultural fields. For example, crop stalks, wood dust, bamboo dust, tree branches are valueless agricultural wastes. However, you can use Customizable wood log charcoal making machine to turn them into flammable briquettes which can be sold.

wood log charcoal making machine in Southeast Asia can make powdery and small granular material that contain lignin into briquettes. In order to produce high-quality briquettes, you should use material that is shorter than 3mm. Generally, a crushing machine will be used before the briquette machine to make material into suitable powder.

It is common that pilot run should be done before the wood log charcoal making machine is put into use. Biomass briquette equipment is no exception. It should idle without any load for about 3 minutes at the beginning. If everything goes smoothly, you can add some material into the feeding port.